<status value="draft" /> <description value="The PractitionerRole represents the activity (such as specialty and job title) and contact information that a Practitioner may perform at an organization/location." /> <fhirVersion value="4.0.0" /> <kind value="resource" /> <abstract value="false" /> <type value="PractitionerRole" /> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" /> <derivation value="constraint" /> <snapshot> <element id="PractitionerRole"> <path value="PractitionerRole" /> <short value="Roles/organizations the practitioner is associated with" /> <definition value="A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time." /> <min value="0" /> <max value="*" /> <base> <path value="PractitionerRole" /> <min value="0" /> <max value="*" /> </base> <constraint> <key value="dom-2" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources" /> <expression value="contained.contained.empty()" /> <xpath value="not(parent::f:contained and f:contained)" /> </constraint> <constraint> <key value="dom-4" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated" /> <expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))" /> </constraint> <constraint> <key value="dom-3" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource" /> <expression value="contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()" /> <xpath value="not(exists(for $contained in f:contained return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))" /> </constraint> <constraint> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice"> <valueBoolean value="true" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation"> <valueMarkdown value="When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time." /> </extension> <key value="dom-6" /> <severity value="warning" /> <human value="A resource should have narrative for robust management" /> <expression value="text.div.exists()" /> <xpath value="exists(f:text/h:div)" /> </constraint> <constraint> <key value="dom-5" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a security label" /> <expression value="contained.meta.security.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:security))" /> </constraint> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="v2" /> <map value="PRD (as one example)" /> </mapping> <mapping> <identity value="rim" /> <map value="Role" /> </mapping> <mapping> <identity value="servd" /> <map value="ServiceSiteProvider" /> </mapping> </element> <element id="PractitionerRole.id"> <path value="PractitionerRole.id" /> <short value="Logical id of this artifact" /> <definition value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes." /> <comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.id" /> <min value="0" /> <max value="*" /> </base> <type> <code value="id" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.meta"> <path value="PractitionerRole.meta" /> <short value="Metadata about the resource" /> <definition value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource." /> <min value="1" /> <max value="1" /> <base> <path value="Resource.meta" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.meta.id"> <path value="PractitionerRole.meta.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.meta.extension"> <path value="PractitionerRole.meta.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.meta.versionId"> <path value="PractitionerRole.meta.versionId" /> <short value="Version specific identifier" /> <definition value="The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted." /> <comment value="The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes." /> <min value="0" /> <max value="1" /> <base> <path value="Meta.versionId" /> <min value="0" /> <max value="*" /> </base> <type> <code value="id" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.meta.lastUpdated"> <path value="PractitionerRole.meta.lastUpdated" /> <short value="When the resource version last changed" /> <definition value="When the resource last changed - e.g. when the version changed." /> <comment value="This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a [read](http.html#read) interaction." /> <min value="0" /> <max value="1" /> <base> <path value="Meta.lastUpdated" /> <min value="0" /> <max value="*" /> </base> <type> <code value="instant" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.meta.source"> <path value="PractitionerRole.meta.source" /> <short value="Identifies where the resource comes from" /> <definition value="A uri that identifies the source system of the resource. This provides a minimal amount of [Provenance](provenance.html#) information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc." /> <comment value="In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL." /> <min value="0" /> <max value="1" /> <base> <path value="Meta.source" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.meta.profile"> <path value="PractitionerRole.meta.profile" /> <short value="Profiles this resource claims to conform to" /> <definition value="A list of profiles (references to [StructureDefinition](structuredefinition.html#) resources) that this resource claims to conform to. The URL is a reference to [StructureDefinition.url](structuredefinition-definitions.html#StructureDefinition.url)." /> <comment value="#### **_` FOR eREFERRAL USAGE: The meta.profile = http://ehealthontario.ca/fhir/StructureDefinition/ca-on-eReferral-profile-PractitionerRole|1.0.0 `_** It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set." /> <min value="1" /> <max value="*" /> <base> <path value="Meta.profile" /> <min value="0" /> <max value="*" /> </base> <type> <code value="canonical" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/StructureDefinition" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.meta.security"> <path value="PractitionerRole.meta.security" /> <short value="Security Labels applied to this resource" /> <definition value="Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure." /> <comment value="The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored." /> <min value="0" /> <max value="*" /> <base> <path value="Meta.security" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <binding> <strength value="extensible" /> <description value="Security Labels from the Healthcare Privacy and Security Classification System." /> <valueSet value="http://hl7.org/fhir/ValueSet/security-labels" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="PractitionerRole.meta.tag"> <path value="PractitionerRole.meta.tag" /> <short value="Tags applied to this resource" /> <definition value="Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource." /> <comment value="The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored." /> <min value="0" /> <max value="*" /> <base> <path value="Meta.tag" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <binding> <strength value="example" /> <description value="Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones"." /> <valueSet value="http://hl7.org/fhir/ValueSet/common-tags" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="PractitionerRole.implicitRules"> <path value="PractitionerRole.implicitRules" /> <short value="A set of rules under which this content was created" /> <definition value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc." /> <comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.implicitRules" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.language"> <path value="PractitionerRole.language" /> <short value="Language of the resource content" /> <definition value="The base language in which the resource is written." /> <comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.language" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <binding> <strength value="preferred" /> <description value="A human language." /> <valueSet value="http://hl7.org/fhir/ValueSet/languages" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.text"> <path value="PractitionerRole.text" /> <short value="Text summary of the resource, for human interpretation" /> <definition value="A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety." /> <comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later." /> <alias value="narrative" /> <alias value="html" /> <alias value="xhtml" /> <alias value="display" /> <min value="0" /> <max value="1" /> <base> <path value="DomainResource.text" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Narrative" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.text?" /> </mapping> </element> <element id="PractitionerRole.contained"> <path value="PractitionerRole.contained" /> <short value="Contained, inline Resources" /> <definition value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope." /> <comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels." /> <alias value="inline resources" /> <alias value="anonymous resources" /> <alias value="contained resources" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.contained" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Resource" /> </type> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.extension"> <path value="PractitionerRole.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.modifierExtension"> <path value="PractitionerRole.modifierExtension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Extensions that cannot be ignored" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.identifier"> <path value="PractitionerRole.identifier" /> <short value="Business Identifiers that are specific to a role/location" /> <definition value="Business Identifiers that are specific to a role/location." /> <requirements value="Often, specific identities are assigned for the agent." /> <min value="0" /> <max value="*" /> <base> <path value="PractitionerRole.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.identifier" /> </mapping> <mapping> <identity value="v2" /> <map value="PRD-7 (or XCN.1)" /> </mapping> <mapping> <identity value="rim" /> <map value=".id" /> </mapping> <mapping> <identity value="servd" /> <map value="./Identifiers" /> </mapping> </element> <element id="PractitionerRole.identifier.id"> <path value="PractitionerRole.identifier.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.identifier.extension"> <path value="PractitionerRole.identifier.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.identifier.use"> <path value="PractitionerRole.identifier.use" /> <short value="usual | official | temp | secondary | old (If known)" /> <definition value="The purpose of this identifier." /> <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." /> <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.use" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one." /> <isSummary value="true" /> <binding> <strength value="required" /> <description value="Identifies the purpose for this identifier, if known ." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.0" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="PractitionerRole.identifier.type"> <path value="PractitionerRole.identifier.type" /> <short value="Description of identifier" /> <definition value="A coded type for the identifier that can be used to determine which identifier to use for a specific purpose." /> <comment value="This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." /> <requirements value="Allows users to make use of identifiers when the identifier system is not known." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.type" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <binding> <strength value="extensible" /> <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.5" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="PractitionerRole.identifier.type.id"> <path value="PractitionerRole.identifier.type.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.identifier.type.extension"> <path value="PractitionerRole.identifier.type.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.identifier.type.coding"> <path value="PractitionerRole.identifier.type.coding" /> <short value="Code defined by a terminology system" /> <definition value="A reference to a code defined by a terminology system." /> <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="*" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="PractitionerRole.identifier.type.coding.id"> <path value="PractitionerRole.identifier.type.coding.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="0" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.identifier.type.coding.extension"> <path value="PractitionerRole.identifier.type.coding.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.identifier.type.coding.system"> <path value="PractitionerRole.identifier.type.coding.system" /> <short value="Identity of the terminology system" /> <definition value="The identification of the code system that defines the meaning of the symbol in the code." /> <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." /> <requirements value="Need to be unambiguous about the source of the definition of the symbol." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.system" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystem" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" /> </mapping> </element> <element id="PractitionerRole.identifier.type.coding.version"> <path value="PractitionerRole.identifier.type.coding.version" /> <short value="Version of the system - if relevant" /> <definition value="The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged." /> <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." /> <min value="0" /> <max value="0" /> <base> <path value="Coding.version" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.7" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystemVersion" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" /> </mapping> </element> <element id="PractitionerRole.identifier.type.coding.code"> <path value="PractitionerRole.identifier.type.coding.code" /> <short value="Symbol in syntax defined by the system" /> <definition value="A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination)." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to refer to a particular code in the system." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.code" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./code" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" /> </mapping> </element> <element id="PractitionerRole.identifier.type.coding.display"> <path value="PractitionerRole.identifier.type.coding.display" /> <short value="Representation defined by the system" /> <definition value="A representation of the meaning of the code in the system, following the rules of the system." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know the system." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.display" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.2 - but note this is not well followed" /> </mapping> <mapping> <identity value="rim" /> <map value="CV.displayName" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" /> </mapping> </element> <element id="PractitionerRole.identifier.type.coding.userSelected"> <path value="PractitionerRole.identifier.type.coding.userSelected" /> <short value="If this coding was chosen directly by the user" /> <definition value="Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays)." /> <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." /> <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." /> <min value="0" /> <max value="0" /> <base> <path value="Coding.userSelected" /> <min value="0" /> <max value="*" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="Sometimes implied by being first" /> </mapping> <mapping> <identity value="rim" /> <map value="CD.codingRationale" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]" /> </mapping> </element> <element id="PractitionerRole.identifier.type.text"> <path value="PractitionerRole.identifier.type.text" /> <short value="Plain text representation of the concept" /> <definition value="A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user." /> <comment value="Very often the text is the same as a displayName of one of the codings." /> <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.text" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.9. But note many systems use C*E.2 for this" /> </mapping> <mapping> <identity value="rim" /> <map value="./originalText[mediaType/code="text/plain"]/data" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" /> </mapping> </element> <element id="PractitionerRole.identifier.system"> <path value="PractitionerRole.identifier.system" /> <short value="The namespace for the identifier value" /> <definition value="Establishes the namespace for the value - that is, a URL that describes a set values that are unique." /> <comment value="Identifier.system is always case sensitive." /> <requirements value="There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.system" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <example> <label value="General" /> <valueUri value="http://www.acme.com/identifiers/patient" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / EI-2-4" /> </mapping> <mapping> <identity value="rim" /> <map value="II.root or Role.id.root" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierType" /> </mapping> </element> <element id="PractitionerRole.identifier.value"> <path value="PractitionerRole.identifier.value" /> <short value="The value that is unique" /> <definition value="The portion of the identifier typically relevant to the user and which is unique within the context of the system." /> <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.value" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="123456" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.1 / EI.1" /> </mapping> <mapping> <identity value="rim" /> <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="PractitionerRole.identifier.period"> <path value="PractitionerRole.identifier.period" /> <short value="Time period when id is/was valid for use" /> <definition value="Time period during which identifier is/was valid for use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.period" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.7 + CX.8" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.effectiveTime or implied by context" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="PractitionerRole.identifier.assigner"> <path value="PractitionerRole.identifier.assigner" /> <short value="Organization that issued id (may be just text)" /> <definition value="Organization that issued/manages the identifier." /> <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.assigner" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / (CX.4,CX.9,CX.10)" /> </mapping> <mapping> <identity value="rim" /> <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierIssuingAuthority" /> </mapping> </element> <element id="PractitionerRole.active"> <path value="PractitionerRole.active" /> <short value="Whether this practitioner role record is in active use" /> <definition value="Whether this practitioner role record is in active use." /> <comment value="If this value is false, you may refer to the period to see when the role was in active use. If there is no period specified, no inference can be made about when it was active." /> <requirements value="Need to be able to mark a practitioner role record as not to be used because it was created in error, or otherwise no longer in active use." /> <min value="0" /> <max value="1" /> <base> <path value="PractitionerRole.active" /> <min value="0" /> <max value="*" /> </base> <type> <code value="boolean" /> </type> <meaningWhenMissing value="This resource is generally assumed to be active if no value is provided for the active element" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.status" /> </mapping> <mapping> <identity value="v2" /> <map value="STF-7" /> </mapping> <mapping> <identity value="rim" /> <map value=".statusCode" /> </mapping> </element> <element id="PractitionerRole.period"> <path value="PractitionerRole.period" /> <short value="The period during which the practitioner is authorized to perform in these role(s)" /> <definition value="The period during which the person is authorized to act as a practitioner in these role(s) for the organization." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <requirements value="Even after the agencies is revoked, the fact that it existed must still be recorded." /> <min value="0" /> <max value="1" /> <base> <path value="PractitionerRole.period" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.done[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="PRD-8/9 / PRA-5.4" /> </mapping> <mapping> <identity value="rim" /> <map value=".performance[@typeCode <= 'PPRF'].ActDefinitionOrEvent.effectiveTime" /> </mapping> <mapping> <identity value="servd" /> <map value="(ServD maps Practitioners and Organizations via another entity, so this concept is not available)" /> </mapping> </element> <element id="PractitionerRole.practitioner"> <path value="PractitionerRole.practitioner" /> <short value="Practitioner that is able to provide the defined services for the organization" /> <definition value="Practitioner that is able to provide the defined services for the organization." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="1" /> <base> <path value="PractitionerRole.practitioner" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="rim" /> <map value=".player" /> </mapping> </element> <element id="PractitionerRole.practitioner.id"> <path value="PractitionerRole.practitioner.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.practitioner.extension"> <path value="PractitionerRole.practitioner.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.practitioner.reference"> <path value="PractitionerRole.practitioner.reference" /> <short value="Literal reference, Relative, internal or absolute URL" /> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources." /> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.practitioner.type"> <path value="PractitionerRole.practitioner.type" /> <short value="Type the reference refers to (e.g. "Patient")" /> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)." /> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <binding> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.practitioner.identifier"> <path value="PractitionerRole.practitioner.identifier" /> <short value="Logical reference, when literal reference is not known" /> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference." /> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="PractitionerRole.practitioner.identifier.id"> <path value="PractitionerRole.practitioner.identifier.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.practitioner.identifier.extension"> <path value="PractitionerRole.practitioner.identifier.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.practitioner.identifier.use"> <path value="PractitionerRole.practitioner.identifier.use" /> <short value="usual | official | temp | secondary | old (If known)" /> <definition value="The purpose of this identifier." /> <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." /> <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.use" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one." /> <isSummary value="true" /> <binding> <strength value="required" /> <description value="Identifies the purpose for this identifier, if known ." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.0" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="PractitionerRole.practitioner.identifier.type"> <path value="PractitionerRole.practitioner.identifier.type" /> <short value="Description of identifier" /> <definition value="A coded type for the identifier that can be used to determine which identifier to use for a specific purpose." /> <comment value="This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." /> <requirements value="Allows users to make use of identifiers when the identifier system is not known." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.type" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <binding> <strength value="extensible" /> <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.5" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="PractitionerRole.practitioner.identifier.system"> <path value="PractitionerRole.practitioner.identifier.system" /> <short value="The namespace for the identifier value" /> <definition value="Establishes the namespace for the value - that is, a URL that describes a set values that are unique." /> <comment value="Identifier.system is always case sensitive." /> <requirements value="There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.system" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <example> <label value="General" /> <valueUri value="http://www.acme.com/identifiers/patient" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / EI-2-4" /> </mapping> <mapping> <identity value="rim" /> <map value="II.root or Role.id.root" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierType" /> </mapping> </element> <element id="PractitionerRole.practitioner.identifier.value"> <path value="PractitionerRole.practitioner.identifier.value" /> <short value="The value that is unique" /> <definition value="The portion of the identifier typically relevant to the user and which is unique within the context of the system." /> <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.value" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="123456" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.1 / EI.1" /> </mapping> <mapping> <identity value="rim" /> <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="PractitionerRole.practitioner.identifier.period"> <path value="PractitionerRole.practitioner.identifier.period" /> <short value="Time period when id is/was valid for use" /> <definition value="Time period during which identifier is/was valid for use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.period" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.7 + CX.8" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.effectiveTime or implied by context" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="PractitionerRole.practitioner.identifier.assigner"> <path value="PractitionerRole.practitioner.identifier.assigner" /> <short value="Organization that issued id (may be just text)" /> <definition value="Organization that issued/manages the identifier." /> <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.assigner" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / (CX.4,CX.9,CX.10)" /> </mapping> <mapping> <identity value="rim" /> <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierIssuingAuthority" /> </mapping> </element> <element id="PractitionerRole.practitioner.display"> <path value="PractitionerRole.practitioner.display" /> <short value="Text alternative for the resource" /> <definition value="Plain text narrative that identifies the resource in addition to the resource reference." /> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.organization"> <path value="PractitionerRole.organization" /> <short value="Organization where the roles are available" /> <definition value="The organization where the Practitioner performs the roles associated." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="1" /> <base> <path value="PractitionerRole.organization" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="rim" /> <map value=".scoper" /> </mapping> </element> <element id="PractitionerRole.organization.id"> <path value="PractitionerRole.organization.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.organization.extension"> <path value="PractitionerRole.organization.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.organization.reference"> <path value="PractitionerRole.organization.reference" /> <short value="Literal reference, Relative, internal or absolute URL" /> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources." /> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.organization.type"> <path value="PractitionerRole.organization.type" /> <short value="Type the reference refers to (e.g. "Patient")" /> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)." /> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <binding> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.organization.identifier"> <path value="PractitionerRole.organization.identifier" /> <short value="Logical reference, when literal reference is not known" /> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference." /> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="PractitionerRole.organization.identifier.id"> <path value="PractitionerRole.organization.identifier.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.organization.identifier.extension"> <path value="PractitionerRole.organization.identifier.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.organization.identifier.use"> <path value="PractitionerRole.organization.identifier.use" /> <short value="usual | official | temp | secondary | old (If known)" /> <definition value="The purpose of this identifier." /> <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." /> <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.use" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one." /> <isSummary value="true" /> <binding> <strength value="required" /> <description value="Identifies the purpose for this identifier, if known ." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.0" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="PractitionerRole.organization.identifier.type"> <path value="PractitionerRole.organization.identifier.type" /> <short value="Description of identifier" /> <definition value="A coded type for the identifier that can be used to determine which identifier to use for a specific purpose." /> <comment value="This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." /> <requirements value="Allows users to make use of identifiers when the identifier system is not known." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.type" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <binding> <strength value="extensible" /> <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.5" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="PractitionerRole.organization.identifier.system"> <path value="PractitionerRole.organization.identifier.system" /> <short value="The namespace for the identifier value" /> <definition value="Establishes the namespace for the value - that is, a URL that describes a set values that are unique." /> <comment value="Identifier.system is always case sensitive." /> <requirements value="There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.system" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <example> <label value="General" /> <valueUri value="http://www.acme.com/identifiers/patient" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / EI-2-4" /> </mapping> <mapping> <identity value="rim" /> <map value="II.root or Role.id.root" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierType" /> </mapping> </element> <element id="PractitionerRole.organization.identifier.value"> <path value="PractitionerRole.organization.identifier.value" /> <short value="The value that is unique" /> <definition value="The portion of the identifier typically relevant to the user and which is unique within the context of the system." /> <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.value" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="123456" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.1 / EI.1" /> </mapping> <mapping> <identity value="rim" /> <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="PractitionerRole.organization.identifier.period"> <path value="PractitionerRole.organization.identifier.period" /> <short value="Time period when id is/was valid for use" /> <definition value="Time period during which identifier is/was valid for use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.period" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.7 + CX.8" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.effectiveTime or implied by context" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="PractitionerRole.organization.identifier.assigner"> <path value="PractitionerRole.organization.identifier.assigner" /> <short value="Organization that issued id (may be just text)" /> <definition value="Organization that issued/manages the identifier." /> <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.assigner" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / (CX.4,CX.9,CX.10)" /> </mapping> <mapping> <identity value="rim" /> <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierIssuingAuthority" /> </mapping> </element> <element id="PractitionerRole.organization.display"> <path value="PractitionerRole.organization.display" /> <short value="Text alternative for the resource" /> <definition value="Plain text narrative that identifies the resource in addition to the resource reference." /> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.code"> <path value="PractitionerRole.code" /> <short value="Roles which this practitioner may perform" /> <definition value="Roles which this practitioner is authorized to perform for the organization." /> <comment value="A person may have more than one role." /> <requirements value="Need to know what authority the practitioner has - what can they do?" /> <min value="0" /> <max value="*" /> <base> <path value="PractitionerRole.code" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <strength value="extensible" /> <description value="The role a person plays representing an organization." /> <valueSet value="http://hl7.org/fhir/ValueSet/practitioner-role" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="PRD-1 / STF-18 / PRA-3 / PRT-4 / ROL-3 / ORC-12 / OBR-16 / PV1-7 / PV1-8 / PV1-9 / PV1-17" /> </mapping> <mapping> <identity value="rim" /> <map value=".code" /> </mapping> <mapping> <identity value="servd" /> <map value="(ServD maps Practitioners and Organizations via another entity, so this concept is not available)" /> </mapping> </element> <element id="PractitionerRole.code.id"> <path value="PractitionerRole.code.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.code.extension"> <path value="PractitionerRole.code.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.code.coding"> <path value="PractitionerRole.code.coding" /> <short value="Code defined by a terminology system" /> <definition value="A reference to a code defined by a terminology system." /> <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="*" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="PractitionerRole.code.coding.id"> <path value="PractitionerRole.code.coding.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.code.coding.extension"> <path value="PractitionerRole.code.coding.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.code.coding.system"> <path value="PractitionerRole.code.coding.system" /> <short value="Identity of the terminology system" /> <definition value="The identification of the code system that defines the meaning of the symbol in the code." /> <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." /> <requirements value="Need to be unambiguous about the source of the definition of the symbol." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.system" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystem" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" /> </mapping> </element> <element id="PractitionerRole.code.coding.version"> <path value="PractitionerRole.code.coding.version" /> <short value="Version of the system - if relevant" /> <definition value="The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged." /> <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.version" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.7" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystemVersion" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" /> </mapping> </element> <element id="PractitionerRole.code.coding.code"> <path value="PractitionerRole.code.coding.code" /> <short value="Symbol in syntax defined by the system" /> <definition value="A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination)." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to refer to a particular code in the system." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.code" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./code" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" /> </mapping> </element> <element id="PractitionerRole.code.coding.display"> <path value="PractitionerRole.code.coding.display" /> <short value="Representation defined by the system" /> <definition value="A representation of the meaning of the code in the system, following the rules of the system." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know the system." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.display" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.2 - but note this is not well followed" /> </mapping> <mapping> <identity value="rim" /> <map value="CV.displayName" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" /> </mapping> </element> <element id="PractitionerRole.code.coding.userSelected"> <path value="PractitionerRole.code.coding.userSelected" /> <short value="If this coding was chosen directly by the user" /> <definition value="Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays)." /> <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." /> <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.userSelected" /> <min value="0" /> <max value="*" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="Sometimes implied by being first" /> </mapping> <mapping> <identity value="rim" /> <map value="CD.codingRationale" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]" /> </mapping> </element> <element id="PractitionerRole.code.text"> <path value="PractitionerRole.code.text" /> <short value="Plain text representation of the concept" /> <definition value="A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user." /> <comment value="Very often the text is the same as a displayName of one of the codings." /> <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.text" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.9. But note many systems use C*E.2 for this" /> </mapping> <mapping> <identity value="rim" /> <map value="./originalText[mediaType/code="text/plain"]/data" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" /> </mapping> </element> <element id="PractitionerRole.specialty"> <path value="PractitionerRole.specialty" /> <short value="Specific specialty of the practitioner" /> <definition value="Specific specialty of the practitioner." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <min value="0" /> <max value="*" /> <base> <path value="PractitionerRole.specialty" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <strength value="extensible" /> <description value="Specific specialty associated with the agency." /> <valueSet value="https://fhir.infoway-inforoute.ca/ValueSet/practitionerspecialty" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="PRA-5" /> </mapping> <mapping> <identity value="rim" /> <map value=".player.HealthCareProvider[@classCode = 'PROV'].code" /> </mapping> <mapping> <identity value="servd" /> <map value="./Specialty" /> </mapping> </element> <element id="PractitionerRole.specialty.id"> <path value="PractitionerRole.specialty.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.specialty.extension"> <path value="PractitionerRole.specialty.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.specialty.coding"> <path value="PractitionerRole.specialty.coding" /> <short value="Code defined by a terminology system" /> <definition value="A reference to a code defined by a terminology system." /> <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="*" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <strength value="extensible" /> <valueSet value="https://fhir.infoway-inforoute.ca/ValueSet/practitionerspecialty" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="PractitionerRole.specialty.coding.id"> <path value="PractitionerRole.specialty.coding.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.specialty.coding.extension"> <path value="PractitionerRole.specialty.coding.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.specialty.coding.system"> <path value="PractitionerRole.specialty.coding.system" /> <short value="Identity of the terminology system" /> <definition value="The identification of the code system that defines the meaning of the symbol in the code." /> <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." /> <requirements value="Need to be unambiguous about the source of the definition of the symbol." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.system" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <fixedUri value="https://fhir.infoway-inforoute.ca/CodeSystem/snomedctcaextension " /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystem" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" /> </mapping> </element> <element id="PractitionerRole.specialty.coding.version"> <path value="PractitionerRole.specialty.coding.version" /> <short value="Version of the system - if relevant" /> <definition value="The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged." /> <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.version" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.7" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystemVersion" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" /> </mapping> </element> <element id="PractitionerRole.specialty.coding.code"> <path value="PractitionerRole.specialty.coding.code" /> <short value="Symbol in syntax defined by the system" /> <definition value="A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination)." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to refer to a particular code in the system." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.code" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./code" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" /> </mapping> </element> <element id="PractitionerRole.specialty.coding.display"> <path value="PractitionerRole.specialty.coding.display" /> <short value="Representation defined by the system" /> <definition value="A representation of the meaning of the code in the system, following the rules of the system." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know the system." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.display" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.2 - but note this is not well followed" /> </mapping> <mapping> <identity value="rim" /> <map value="CV.displayName" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" /> </mapping> </element> <element id="PractitionerRole.specialty.coding.userSelected"> <path value="PractitionerRole.specialty.coding.userSelected" /> <short value="If this coding was chosen directly by the user" /> <definition value="Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays)." /> <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." /> <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.userSelected" /> <min value="0" /> <max value="*" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="Sometimes implied by being first" /> </mapping> <mapping> <identity value="rim" /> <map value="CD.codingRationale" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]" /> </mapping> </element> <element id="PractitionerRole.specialty.text"> <path value="PractitionerRole.specialty.text" /> <short value="Plain text representation of the concept" /> <definition value="A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user." /> <comment value="Very often the text is the same as a displayName of one of the codings." /> <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.text" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.9. But note many systems use C*E.2 for this" /> </mapping> <mapping> <identity value="rim" /> <map value="./originalText[mediaType/code="text/plain"]/data" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" /> </mapping> </element> <element id="PractitionerRole.location"> <path value="PractitionerRole.location" /> <short value="The location(s) at which this practitioner provides care" /> <definition value="The location(s) at which this practitioner provides care." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="*" /> <base> <path value="PractitionerRole.location" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Location" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.where[x]" /> </mapping> <mapping> <identity value="rim" /> <map value=".performance.ActDefinitionOrEvent.ServiceDeliveryLocation[@classCode = 'SDLOC']" /> </mapping> <mapping> <identity value="servd" /> <map value="(ServD maps Practitioners and Organizations via another entity, so this concept is not available)<br/> However these are accessed via the Site.ServiceSite.ServiceSiteProvider record. (The Site has the location)" /> </mapping> </element> <element id="PractitionerRole.location.id"> <path value="PractitionerRole.location.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.location.extension"> <path value="PractitionerRole.location.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.location.reference"> <path value="PractitionerRole.location.reference" /> <short value="Literal reference, Relative, internal or absolute URL" /> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources." /> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.location.type"> <path value="PractitionerRole.location.type" /> <short value="Type the reference refers to (e.g. "Patient")" /> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)." /> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <binding> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.location.identifier"> <path value="PractitionerRole.location.identifier" /> <short value="Logical reference, when literal reference is not known" /> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference." /> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="PractitionerRole.location.identifier.id"> <path value="PractitionerRole.location.identifier.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.location.identifier.extension"> <path value="PractitionerRole.location.identifier.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.location.identifier.use"> <path value="PractitionerRole.location.identifier.use" /> <short value="usual | official | temp | secondary | old (If known)" /> <definition value="The purpose of this identifier." /> <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." /> <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.use" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one." /> <isSummary value="true" /> <binding> <strength value="required" /> <description value="Identifies the purpose for this identifier, if known ." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.0" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="PractitionerRole.location.identifier.type"> <path value="PractitionerRole.location.identifier.type" /> <short value="Description of identifier" /> <definition value="A coded type for the identifier that can be used to determine which identifier to use for a specific purpose." /> <comment value="This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." /> <requirements value="Allows users to make use of identifiers when the identifier system is not known." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.type" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <binding> <strength value="extensible" /> <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.5" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="PractitionerRole.location.identifier.system"> <path value="PractitionerRole.location.identifier.system" /> <short value="The namespace for the identifier value" /> <definition value="Establishes the namespace for the value - that is, a URL that describes a set values that are unique." /> <comment value="Identifier.system is always case sensitive." /> <requirements value="There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.system" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <example> <label value="General" /> <valueUri value="http://www.acme.com/identifiers/patient" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / EI-2-4" /> </mapping> <mapping> <identity value="rim" /> <map value="II.root or Role.id.root" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierType" /> </mapping> </element> <element id="PractitionerRole.location.identifier.value"> <path value="PractitionerRole.location.identifier.value" /> <short value="The value that is unique" /> <definition value="The portion of the identifier typically relevant to the user and which is unique within the context of the system." /> <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.value" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="123456" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.1 / EI.1" /> </mapping> <mapping> <identity value="rim" /> <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="PractitionerRole.location.identifier.period"> <path value="PractitionerRole.location.identifier.period" /> <short value="Time period when id is/was valid for use" /> <definition value="Time period during which identifier is/was valid for use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.period" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.7 + CX.8" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.effectiveTime or implied by context" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="PractitionerRole.location.identifier.assigner"> <path value="PractitionerRole.location.identifier.assigner" /> <short value="Organization that issued id (may be just text)" /> <definition value="Organization that issued/manages the identifier." /> <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.assigner" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / (CX.4,CX.9,CX.10)" /> </mapping> <mapping> <identity value="rim" /> <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierIssuingAuthority" /> </mapping> </element> <element id="PractitionerRole.location.display"> <path value="PractitionerRole.location.display" /> <short value="Text alternative for the resource" /> <definition value="Plain text narrative that identifies the resource in addition to the resource reference." /> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.healthcareService"> <path value="PractitionerRole.healthcareService" /> <short value="The list of healthcare services that this worker provides for this role's Organization/Location(s)" /> <definition value="The list of healthcare services that this worker provides for this role's Organization/Location(s)." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="*" /> <base> <path value="PractitionerRole.healthcareService" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/HealthcareService" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="EDU-2 / AFF-3" /> </mapping> <mapping> <identity value="rim" /> <map value=".player.QualifiedEntity[@classCode = 'QUAL'].code" /> </mapping> </element> <element id="PractitionerRole.telecom"> <path value="PractitionerRole.telecom" /> <short value="Contact details that are specific to the role/location/service" /> <definition value="Contact details that are specific to the role/location/service." /> <requirements value="Often practitioners have a dedicated line for each location (or service) that they work at, and need to be able to define separate contact details for each of these." /> <min value="0" /> <max value="*" /> <base> <path value="PractitionerRole.telecom" /> <min value="0" /> <max value="*" /> </base> <type> <code value="ContactPoint" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="cpt-2" /> <severity value="error" /> <human value="A system is required if a value is provided." /> <expression value="value.empty() or system.exists()" /> <xpath value="not(exists(f:value)) or exists(f:system)" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN" /> </mapping> <mapping> <identity value="rim" /> <map value="TEL" /> </mapping> <mapping> <identity value="servd" /> <map value="ContactPoint" /> </mapping> <mapping> <identity value="rim" /> <map value=".telecom" /> </mapping> </element> <element id="PractitionerRole.telecom.id"> <path value="PractitionerRole.telecom.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.telecom.extension"> <path value="PractitionerRole.telecom.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.telecom.system"> <path value="PractitionerRole.telecom.system" /> <short value="phone | fax | email | pager | url | sms | other" /> <definition value="Telecommunications form for contact point - what communications system is required to make use of the contact." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="ContactPoint.system" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <condition value="cpt-2" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <strength value="required" /> <description value="Telecommunications form for contact point." /> <valueSet value="http://hl7.org/fhir/ValueSet/contact-point-system|4.0.0" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./scheme" /> </mapping> <mapping> <identity value="servd" /> <map value="./ContactPointType" /> </mapping> </element> <element id="PractitionerRole.telecom.value"> <path value="PractitionerRole.telecom.value" /> <short value="The actual contact point details" /> <definition value="The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address)." /> <comment value="Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value." /> <requirements value="Need to support legacy numbers that are not in a tightly controlled format." /> <min value="1" /> <max value="1" /> <base> <path value="ContactPoint.value" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN.1 (or XTN.12)" /> </mapping> <mapping> <identity value="rim" /> <map value="./url" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="PractitionerRole.telecom.use"> <path value="PractitionerRole.telecom.use" /> <short value="home | work | temp | old | mobile - purpose of this contact point" /> <definition value="Identifies the purpose for the contact point." /> <comment value="Applications can assume that a contact is current unless it explicitly says that it is temporary or old." /> <requirements value="Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose." /> <min value="0" /> <max value="1" /> <base> <path value="ContactPoint.use" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one" /> <isSummary value="true" /> <binding> <strength value="required" /> <description value="Use of contact point." /> <valueSet value="http://hl7.org/fhir/ValueSet/contact-point-use|4.0.0" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN.2 - but often indicated by field" /> </mapping> <mapping> <identity value="rim" /> <map value="unique(./use)" /> </mapping> <mapping> <identity value="servd" /> <map value="./ContactPointPurpose" /> </mapping> </element> <element id="PractitionerRole.telecom.rank"> <path value="PractitionerRole.telecom.rank" /> <short value="Specify preferred order of use (1 = highest)" /> <definition value="Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values." /> <comment value="Note that rank does not necessarily follow the order in which the contacts are represented in the instance." /> <min value="0" /> <max value="1" /> <base> <path value="ContactPoint.rank" /> <min value="0" /> <max value="*" /> </base> <type> <code value="positiveInt" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.telecom.period"> <path value="PractitionerRole.telecom.period" /> <short value="Time period when the contact point was/is in use" /> <definition value="Time period when the contact point was/is in use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="1" /> <base> <path value="ContactPoint.period" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="./usablePeriod[type="IVL<TS>"]" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="PractitionerRole.availableTime"> <path value="PractitionerRole.availableTime" /> <short value="Times the Service Site is available" /> <definition value="A collection of times the practitioner is available or performing this role at the location and/or healthcareservice." /> <comment value="More detailed availability information may be provided in associated Schedule/Slot resources." /> <min value="0" /> <max value="*" /> <base> <path value="PractitionerRole.availableTime" /> <min value="0" /> <max value="*" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> </element> <element id="PractitionerRole.availableTime.id"> <path value="PractitionerRole.availableTime.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.availableTime.extension"> <path value="PractitionerRole.availableTime.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.availableTime.modifierExtension"> <path value="PractitionerRole.availableTime.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.availableTime.daysOfWeek"> <path value="PractitionerRole.availableTime.daysOfWeek" /> <short value="mon | tue | wed | thu | fri | sat | sun" /> <definition value="Indicates which days of the week are available between the start and end Times." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="*" /> <base> <path value="PractitionerRole.availableTime.daysOfWeek" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <binding> <strength value="required" /> <description value="The days of the week." /> <valueSet value="http://hl7.org/fhir/ValueSet/days-of-week|4.0.0" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> </element> <element id="PractitionerRole.availableTime.allDay"> <path value="PractitionerRole.availableTime.allDay" /> <short value="Always available? e.g. 24 hour service" /> <definition value="Is this always available? (hence times are irrelevant) e.g. 24 hour service." /> <min value="0" /> <max value="1" /> <base> <path value="PractitionerRole.availableTime.allDay" /> <min value="0" /> <max value="*" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> </element> <element id="PractitionerRole.availableTime.availableStartTime"> <path value="PractitionerRole.availableTime.availableStartTime" /> <short value="Opening time of day (ignored if allDay = true)" /> <definition value="The opening time of day. Note: If the AllDay flag is set, then this time is ignored." /> <comment value="The timezone is expected to be for where this HealthcareService is provided at." /> <min value="0" /> <max value="1" /> <base> <path value="PractitionerRole.availableTime.availableStartTime" /> <min value="0" /> <max value="*" /> </base> <type> <code value="time" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> </element> <element id="PractitionerRole.availableTime.availableEndTime"> <path value="PractitionerRole.availableTime.availableEndTime" /> <short value="Closing time of day (ignored if allDay = true)" /> <definition value="The closing time of day. Note: If the AllDay flag is set, then this time is ignored." /> <comment value="The timezone is expected to be for where this HealthcareService is provided at." /> <min value="0" /> <max value="1" /> <base> <path value="PractitionerRole.availableTime.availableEndTime" /> <min value="0" /> <max value="*" /> </base> <type> <code value="time" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> </element> <element id="PractitionerRole.notAvailable"> <path value="PractitionerRole.notAvailable" /> <short value="Not available during this time due to provided reason" /> <definition value="The practitioner is not available or performing this role during this period of time due to the provided reason." /> <min value="0" /> <max value="*" /> <base> <path value="PractitionerRole.notAvailable" /> <min value="0" /> <max value="*" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> </element> <element id="PractitionerRole.notAvailable.id"> <path value="PractitionerRole.notAvailable.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.notAvailable.extension"> <path value="PractitionerRole.notAvailable.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.notAvailable.modifierExtension"> <path value="PractitionerRole.notAvailable.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="PractitionerRole.notAvailable.description"> <path value="PractitionerRole.notAvailable.description" /> <short value="Reason presented to the user explaining why time not available" /> <definition value="The reason that can be presented to the user as to why this time is not available." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="1" /> <max value="1" /> <base> <path value="PractitionerRole.notAvailable.description" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="PractitionerRole.notAvailable.during"> <path value="PractitionerRole.notAvailable.during" /> <short value="Service not available from this date" /> <definition value="Service is not available (seasonally or for a public holiday) from this date." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="1" /> <base> <path value="PractitionerRole.notAvailable.during" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> </element> <element id="PractitionerRole.availabilityExceptions"> <path value="PractitionerRole.availabilityExceptions" /> <short value="Description of availability exceptions" /> <definition value="A description of site availability exceptions, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as details in the available Times and not available Times." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="PractitionerRole.availabilityExceptions" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> </element> <element id="PractitionerRole.endpoint"> <path value="PractitionerRole.endpoint" /> <short value="Technical endpoints providing access to services operated for the practitioner with this role" /> <definition value="Technical endpoints providing access to services operated for the practitioner with this role." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <requirements value="Organizations have multiple systems that provide various services and ,ay also be different for practitioners too. So the endpoint satisfies the need to be able to define the technical connection details for how to connect to them, and for what purpose." /> <min value="0" /> <max value="*" /> <base> <path value="PractitionerRole.endpoint" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Endpoint" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> </element> </snapshot> <differential> <element id="PractitionerRole.meta"> <path value="PractitionerRole.meta" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.meta.profile"> <path value="PractitionerRole.meta.profile" /> <comment value="#### **_` FOR eREFERRAL USAGE: The meta.profile = http://ehealthontario.ca/fhir/StructureDefinition/ca-on-eReferral-profile-PractitionerRole|1.0.0 `_** It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.identifier"> <path value="PractitionerRole.identifier" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.identifier.type.coding.id"> <path value="PractitionerRole.identifier.type.coding.id" /> <max value="0" /> </element> <element id="PractitionerRole.identifier.type.coding.version"> <path value="PractitionerRole.identifier.type.coding.version" /> <max value="0" /> </element> <element id="PractitionerRole.identifier.type.coding.userSelected"> <path value="PractitionerRole.identifier.type.coding.userSelected" /> <max value="0" /> </element> <element id="PractitionerRole.identifier.system"> <path value="PractitionerRole.identifier.system" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.identifier.value"> <path value="PractitionerRole.identifier.value" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.active"> <path value="PractitionerRole.active" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.practitioner"> <path value="PractitionerRole.practitioner" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.practitioner.reference"> <path value="PractitionerRole.practitioner.reference" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.practitioner.identifier"> <path value="PractitionerRole.practitioner.identifier" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.practitioner.identifier.system"> <path value="PractitionerRole.practitioner.identifier.system" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.practitioner.identifier.value"> <path value="PractitionerRole.practitioner.identifier.value" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.organization"> <path value="PractitionerRole.organization" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.organization.reference"> <path value="PractitionerRole.organization.reference" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.organization.identifier"> <path value="PractitionerRole.organization.identifier" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.organization.identifier.system"> <path value="PractitionerRole.organization.identifier.system" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.organization.identifier.value"> <path value="PractitionerRole.organization.identifier.value" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.code"> <path value="PractitionerRole.code" /> <mustSupport value="true" /> <binding> <strength value="extensible" /> </binding> </element> <element id="PractitionerRole.code.coding"> <path value="PractitionerRole.code.coding" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.code.coding.system"> <path value="PractitionerRole.code.coding.system" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.code.coding.code"> <path value="PractitionerRole.code.coding.code" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.code.coding.display"> <path value="PractitionerRole.code.coding.display" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.specialty"> <path value="PractitionerRole.specialty" /> <mustSupport value="true" /> <binding> <strength value="extensible" /> <valueSet value="https://fhir.infoway-inforoute.ca/ValueSet/practitionerspecialty" /> </binding> </element> <element id="PractitionerRole.specialty.coding"> <path value="PractitionerRole.specialty.coding" /> <mustSupport value="true" /> <binding> <strength value="extensible" /> <valueSet value="https://fhir.infoway-inforoute.ca/ValueSet/practitionerspecialty" /> </binding> </element> <element id="PractitionerRole.specialty.coding.system"> <path value="PractitionerRole.specialty.coding.system" /> <fixedUri value="https://fhir.infoway-inforoute.ca/CodeSystem/snomedctcaextension " /> <mustSupport value="true" /> </element> <element id="PractitionerRole.specialty.coding.code"> <path value="PractitionerRole.specialty.coding.code" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.specialty.coding.display"> <path value="PractitionerRole.specialty.coding.display" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.location"> <path value="PractitionerRole.location" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.location.reference"> <path value="PractitionerRole.location.reference" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.location.identifier"> <path value="PractitionerRole.location.identifier" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.location.identifier.system"> <path value="PractitionerRole.location.identifier.system" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.location.identifier.value"> <path value="PractitionerRole.location.identifier.value" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.telecom"> <path value="PractitionerRole.telecom" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.telecom.system"> <path value="PractitionerRole.telecom.system" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.telecom.value"> <path value="PractitionerRole.telecom.value" /> <min value="1" /> </element> <element id="PractitionerRole.telecom.use"> <path value="PractitionerRole.telecom.use" /> <mustSupport value="true" /> </element> <element id="PractitionerRole.telecom.rank"> <path value="PractitionerRole.telecom.rank" /> <mustSupport value="true" /> </element> </differential> </StructureDefinition>