<status value="active" /> <date value="2022-04-05" /> <publisher value="gevko GmbH" /> <description value="Ansprechpartner im Krankenhaus" /> <fhirVersion value="4.0.1" /> <kind value="resource" /> <abstract value="false" /> <type value="Person" /> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Person" /> <derivation value="constraint" /> <snapshot> <element id="Person"> <path value="Person" /> <short value="A generic person record" /> <definition value="Demographics and administrative information about a person independent of a specific health-related context." /> <comment value="The Person resource does justice to person registries that keep track of persons regardless of their role. The Person resource is also a primary resource to point to for people acting in a particular role such as SubjectofCare, Practitioner, and Agent. Very few attributes are specific to any role and so Person is kept lean. Most attributes are expected to be tied to the role the Person plays rather than the Person himself. Examples of that are Guardian (SubjectofCare), ContactParty (SubjectOfCare, Practitioner), and multipleBirthInd (SubjectofCare)." /> <min value="0" /> <max value="*" /> <base> <path value="Person" /> <min value="0" /> <max value="*" /> </base> <constraint> <key value="dom-2" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources" /> <expression value="contained.contained.empty()" /> <xpath value="not(parent::f:contained and f:contained)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-4" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated" /> <expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-3" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource" /> <expression value="contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()" /> <xpath value="not(exists(for $id in f:contained/*/f:id/@value return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice"> <valueBoolean value="true" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation"> <valueMarkdown value="When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time." /> </extension> <key value="dom-6" /> <severity value="warning" /> <human value="A resource should have narrative for robust management" /> <expression value="text.`div`.exists()" /> <xpath value="exists(f:text/h:div)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-5" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a security label" /> <expression value="contained.meta.security.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:security))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="rim" /> <map value="Person(classCode="PSN" and determinerCode="INST" and quantity="1")" /> </mapping> </element> <element id="Person.id"> <path value="Person.id" /> <short value="Logical id of this artifact" /> <definition value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes." /> <comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <isSummary value="true" /> </element> <element id="Person.meta"> <path value="Person.meta" /> <short value="Metadata about the resource" /> <definition value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource." /> <min value="1" /> <max value="1" /> <base> <path value="Resource.meta" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Person.meta.id"> <path value="Person.meta.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Person.meta.extension"> <path value="Person.meta.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Person.meta.versionId"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.meta.versionId" /> <short value="Version specific identifier" /> <definition value="The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted." /> <comment value="The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes." /> <min value="0" /> <max value="0" /> <base> <path value="Meta.versionId" /> <min value="0" /> <max value="1" /> </base> <type> <code value="id" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Person.meta.lastUpdated"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.meta.lastUpdated" /> <short value="When the resource version last changed" /> <definition value="When the resource last changed - e.g. when the version changed." /> <comment value="This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a [read](http.html#read) interaction." /> <min value="0" /> <max value="0" /> <base> <path value="Meta.lastUpdated" /> <min value="0" /> <max value="1" /> </base> <type> <code value="instant" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Person.meta.source"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.meta.source" /> <short value="Identifies where the resource comes from" /> <definition value="A uri that identifies the source system of the resource. This provides a minimal amount of [Provenance](provenance.html#) information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc." /> <comment value="In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL." /> <min value="0" /> <max value="0" /> <base> <path value="Meta.source" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Person.meta.profile"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.meta.profile" /> <short value="Profiles this resource claims to conform to" /> <definition value="A list of profiles (references to [StructureDefinition](structuredefinition.html#) resources) that this resource claims to conform to. The URL is a reference to [StructureDefinition.url](structuredefinition-definitions.html#StructureDefinition.url)." /> <comment value="It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set." /> <min value="1" /> <max value="1" /> <base> <path value="Meta.profile" /> <min value="0" /> <max value="*" /> </base> <type> <code value="canonical" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/StructureDefinition" /> </type> <fixedCanonical value="https://fhir.gevko.de/StructureDefinition/EAHB_PR_Person_KH|0.9" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Person.meta.security"> <path value="Person.meta.security" /> <short value="Security Labels applied to this resource" /> <definition value="Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure." /> <comment value="The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored." /> <min value="0" /> <max value="0" /> <base> <path value="Meta.security" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="SecurityLabels" /> </extension> <strength value="extensible" /> <description value="Security Labels from the Healthcare Privacy and Security Classification System." /> <valueSet value="http://hl7.org/fhir/ValueSet/security-labels" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="Person.meta.tag"> <path value="Person.meta.tag" /> <short value="Tags applied to this resource" /> <definition value="Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource." /> <comment value="The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored." /> <min value="0" /> <max value="0" /> <base> <path value="Meta.tag" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Tags" /> </extension> <strength value="example" /> <description value="Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones"." /> <valueSet value="http://hl7.org/fhir/ValueSet/common-tags" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="Person.implicitRules"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.implicitRules" /> <short value="A set of rules under which this content was created" /> <definition value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc." /> <comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc." /> <min value="0" /> <max value="0" /> <base> <path value="Resource.implicitRules" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Person.language"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.language" /> <short value="Language of the resource content" /> <definition value="The base language in which the resource is written." /> <comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." /> <min value="0" /> <max value="0" /> <base> <path value="Resource.language" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet"> <valueCanonical value="http://hl7.org/fhir/ValueSet/all-languages" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Language" /> </extension> <strength value="preferred" /> <description value="A human language." /> <valueSet value="http://hl7.org/fhir/ValueSet/languages" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Person.text"> <path value="Person.text" /> <short value="Text summary of the resource, for human interpretation" /> <definition value="A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety." /> <comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later." /> <alias value="narrative" /> <alias value="html" /> <alias value="xhtml" /> <alias value="display" /> <min value="0" /> <max value="0" /> <base> <path value="DomainResource.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Narrative" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.text?" /> </mapping> </element> <element id="Person.contained"> <path value="Person.contained" /> <short value="Contained, inline Resources" /> <definition value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope." /> <comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels." /> <alias value="inline resources" /> <alias value="anonymous resources" /> <alias value="contained resources" /> <min value="0" /> <max value="0" /> <base> <path value="DomainResource.contained" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Resource" /> </type> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Person.extension"> <path value="Person.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Person.modifierExtension"> <path value="Person.modifierExtension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Extensions that cannot be ignored" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Person.identifier"> <path value="Person.identifier" /> <short value="A human identifier for this person" /> <definition value="Identifier for a person within a particular scope." /> <requirements value="People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the person. Examples are national person identifier and local identifier." /> <min value="0" /> <max value="0" /> <base> <path value="Person.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.identifier" /> </mapping> <mapping> <identity value="v2" /> <map value="PID-3" /> </mapping> <mapping> <identity value="rim" /> <map value=".plays:Role(classCode='IDENT').id" /> </mapping> </element> <element id="Person.name"> <path value="Person.name" /> <short value="A name associated with the person" /> <definition value="A name associated with the person." /> <comment value="Person may have multiple names with different uses or applicable periods." /> <requirements value="Need to be able to track the person by multiple names. Examples are your official name and a partner name." /> <min value="1" /> <max value="1" /> <base> <path value="Person.name" /> <min value="0" /> <max value="*" /> </base> <type> <code value="HumanName" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XPN" /> </mapping> <mapping> <identity value="rim" /> <map value="EN (actually, PN)" /> </mapping> <mapping> <identity value="servd" /> <map value="ProviderName" /> </mapping> <mapping> <identity value="v2" /> <map value="PID-5, PID-9" /> </mapping> <mapping> <identity value="rim" /> <map value="./name" /> </mapping> </element> <element id="Person.name.id"> <path value="Person.name.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Person.name.extension"> <path value="Person.name.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Person.name.use"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.name.use" /> <short value="usual | official | temp | nickname | anonymous | old | maiden" /> <definition value="Identifies the purpose for this name." /> <comment value="Applications can assume that a name is current unless it explicitly says that it is temporary or old." /> <requirements value="Allows the appropriate name for a particular context of use to be selected from among a set of names." /> <min value="0" /> <max value="0" /> <base> <path value="HumanName.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="NameUse" /> </extension> <strength value="required" /> <description value="The use of a human name." /> <valueSet value="http://hl7.org/fhir/ValueSet/name-use|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XPN.7, but often indicated by which field contains the name" /> </mapping> <mapping> <identity value="rim" /> <map value="unique(./use)" /> </mapping> <mapping> <identity value="servd" /> <map value="./NamePurpose" /> </mapping> </element> <element id="Person.name.text"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.name.text" /> <short value="Text representation of the full name" /> <definition value="Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts." /> <comment value="Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part." /> <requirements value="A renderable, unencoded form." /> <min value="0" /> <max value="0" /> <base> <path value="HumanName.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="implied by XPN.11" /> </mapping> <mapping> <identity value="rim" /> <map value="./formatted" /> </mapping> </element> <element id="Person.name.family"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.name.family" /> <short value="Family name (often called 'Surname')" /> <definition value="The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father." /> <comment value="Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures)." /> <alias value="surname" /> <min value="1" /> <max value="1" /> <base> <path value="HumanName.family" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XPN.1/FN.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./part[partType = FAM]" /> </mapping> <mapping> <identity value="servd" /> <map value="./FamilyName" /> </mapping> </element> <element id="Person.name.given"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.name.given" /> <short value="Given names (not always 'first'). Includes middle names" /> <definition value="Given name." /> <comment value="If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first." /> <alias value="first name" /> <alias value="middle name" /> <min value="1" /> <max value="1" /> <base> <path value="HumanName.given" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <orderMeaning value="Given Names appear in the correct order for presenting the name" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XPN.2 + XPN.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./part[partType = GIV]" /> </mapping> <mapping> <identity value="servd" /> <map value="./GivenNames" /> </mapping> </element> <element id="Person.name.prefix"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.name.prefix" /> <short value="Parts that come before the name" /> <definition value="Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="0" /> <base> <path value="HumanName.prefix" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <orderMeaning value="Prefixes appear in the correct order for presenting the name" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XPN.5" /> </mapping> <mapping> <identity value="rim" /> <map value="./part[partType = PFX]" /> </mapping> <mapping> <identity value="servd" /> <map value="./TitleCode" /> </mapping> </element> <element id="Person.name.suffix"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.name.suffix" /> <short value="Parts that come after the name" /> <definition value="Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="0" /> <base> <path value="HumanName.suffix" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <orderMeaning value="Suffixes appear in the correct order for presenting the name" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XPN/4" /> </mapping> <mapping> <identity value="rim" /> <map value="./part[partType = SFX]" /> </mapping> </element> <element id="Person.name.period"> <path value="Person.name.period" /> <short value="Time period when name was/is in use" /> <definition value="Indicates the period of time when this name was valid for the named person." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <requirements value="Allows names to be placed in historical context." /> <min value="0" /> <max value="0" /> <base> <path value="HumanName.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="XPN.13 + XPN.14" /> </mapping> <mapping> <identity value="rim" /> <map value="./usablePeriod[type="IVL<TS>"]" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="Person.telecom"> <path value="Person.telecom" /> <slicing> <discriminator> <type value="value" /> <path value="system" /> </discriminator> <rules value="closed" /> </slicing> <short value="A contact detail for the person" /> <definition value="A contact detail for the person, e.g. a telephone number or an email address." /> <comment value="Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification." /> <requirements value="People have (primary) ways to contact them in some way such as phone, email." /> <min value="1" /> <max value="2" /> <base> <path value="Person.telecom" /> <min value="0" /> <max value="*" /> </base> <type> <code value="ContactPoint" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="cpt-2" /> <severity value="error" /> <human value="A system is required if a value is provided." /> <expression value="value.empty() or system.exists()" /> <xpath value="not(exists(f:value)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/ContactPoint" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN" /> </mapping> <mapping> <identity value="rim" /> <map value="TEL" /> </mapping> <mapping> <identity value="servd" /> <map value="ContactPoint" /> </mapping> <mapping> <identity value="v2" /> <map value="PID-13, PID-14" /> </mapping> <mapping> <identity value="rim" /> <map value="./telecom" /> </mapping> </element> <element id="Person.telecom:phone"> <path value="Person.telecom" /> <sliceName value="phone" /> <short value="Telefon-Nr." /> <definition value="A contact detail for the person, e.g. a telephone number or an email address." /> <comment value="Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification." /> <requirements value="People have (primary) ways to contact them in some way such as phone, email." /> <min value="1" /> <max value="1" /> <base> <path value="Person.telecom" /> <min value="0" /> <max value="*" /> </base> <type> <code value="ContactPoint" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="cpt-2" /> <severity value="error" /> <human value="A system is required if a value is provided." /> <expression value="value.empty() or system.exists()" /> <xpath value="not(exists(f:value)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/ContactPoint" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN" /> </mapping> <mapping> <identity value="rim" /> <map value="TEL" /> </mapping> <mapping> <identity value="servd" /> <map value="ContactPoint" /> </mapping> <mapping> <identity value="v2" /> <map value="PID-13, PID-14" /> </mapping> <mapping> <identity value="rim" /> <map value="./telecom" /> </mapping> </element> <element id="Person.telecom:phone.id"> <path value="Person.telecom.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Person.telecom:phone.extension"> <path value="Person.telecom.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Person.telecom:phone.system"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.system" /> <short value="phone | fax | email | pager | url | sms | other" /> <definition value="Telecommunications form for contact point - what communications system is required to make use of the contact." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="1" /> <max value="1" /> <base> <path value="ContactPoint.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <fixedCode value="phone" /> <condition value="ele-1" /> <condition value="cpt-2" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ContactPointSystem" /> </extension> <strength value="required" /> <description value="Telecommunications form for contact point." /> <valueSet value="http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./scheme" /> </mapping> <mapping> <identity value="servd" /> <map value="./ContactPointType" /> </mapping> </element> <element id="Person.telecom:phone.value"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.value" /> <short value="The actual contact point details" /> <definition value="The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address)." /> <comment value="Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value." /> <requirements value="Need to support legacy numbers that are not in a tightly controlled format." /> <min value="1" /> <max value="1" /> <base> <path value="ContactPoint.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN.1 (or XTN.12)" /> </mapping> <mapping> <identity value="rim" /> <map value="./url" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="Person.telecom:phone.use"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.use" /> <short value="home | work | temp | old | mobile - purpose of this contact point" /> <definition value="Identifies the purpose for the contact point." /> <comment value="Applications can assume that a contact is current unless it explicitly says that it is temporary or old." /> <requirements value="Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose." /> <min value="0" /> <max value="0" /> <base> <path value="ContactPoint.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ContactPointUse" /> </extension> <strength value="required" /> <description value="Use of contact point." /> <valueSet value="http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN.2 - but often indicated by field" /> </mapping> <mapping> <identity value="rim" /> <map value="unique(./use)" /> </mapping> <mapping> <identity value="servd" /> <map value="./ContactPointPurpose" /> </mapping> </element> <element id="Person.telecom:phone.rank"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.rank" /> <short value="Specify preferred order of use (1 = highest)" /> <definition value="Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values." /> <comment value="Note that rank does not necessarily follow the order in which the contacts are represented in the instance." /> <min value="0" /> <max value="0" /> <base> <path value="ContactPoint.rank" /> <min value="0" /> <max value="1" /> </base> <type> <code value="positiveInt" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="n/a" /> </mapping> </element> <element id="Person.telecom:phone.period"> <path value="Person.telecom.period" /> <short value="Time period when the contact point was/is in use" /> <definition value="Time period when the contact point was/is in use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="0" /> <base> <path value="ContactPoint.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="./usablePeriod[type="IVL<TS>"]" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="Person.telecom:fax"> <path value="Person.telecom" /> <sliceName value="fax" /> <short value="Fax-Nr." /> <definition value="A contact detail for the person, e.g. a telephone number or an email address." /> <comment value="Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification." /> <requirements value="People have (primary) ways to contact them in some way such as phone, email." /> <min value="0" /> <max value="1" /> <base> <path value="Person.telecom" /> <min value="0" /> <max value="*" /> </base> <type> <code value="ContactPoint" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="cpt-2" /> <severity value="error" /> <human value="A system is required if a value is provided." /> <expression value="value.empty() or system.exists()" /> <xpath value="not(exists(f:value)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/ContactPoint" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN" /> </mapping> <mapping> <identity value="rim" /> <map value="TEL" /> </mapping> <mapping> <identity value="servd" /> <map value="ContactPoint" /> </mapping> <mapping> <identity value="v2" /> <map value="PID-13, PID-14" /> </mapping> <mapping> <identity value="rim" /> <map value="./telecom" /> </mapping> </element> <element id="Person.telecom:fax.id"> <path value="Person.telecom.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Person.telecom:fax.extension"> <path value="Person.telecom.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Person.telecom:fax.system"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.system" /> <short value="phone | fax | email | pager | url | sms | other" /> <definition value="Telecommunications form for contact point - what communications system is required to make use of the contact." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="1" /> <max value="1" /> <base> <path value="ContactPoint.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <fixedCode value="fax" /> <condition value="ele-1" /> <condition value="cpt-2" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ContactPointSystem" /> </extension> <strength value="required" /> <description value="Telecommunications form for contact point." /> <valueSet value="http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./scheme" /> </mapping> <mapping> <identity value="servd" /> <map value="./ContactPointType" /> </mapping> </element> <element id="Person.telecom:fax.value"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.value" /> <short value="The actual contact point details" /> <definition value="The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address)." /> <comment value="Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value." /> <requirements value="Need to support legacy numbers that are not in a tightly controlled format." /> <min value="1" /> <max value="1" /> <base> <path value="ContactPoint.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN.1 (or XTN.12)" /> </mapping> <mapping> <identity value="rim" /> <map value="./url" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="Person.telecom:fax.use"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.use" /> <short value="home | work | temp | old | mobile - purpose of this contact point" /> <definition value="Identifies the purpose for the contact point." /> <comment value="Applications can assume that a contact is current unless it explicitly says that it is temporary or old." /> <requirements value="Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose." /> <min value="0" /> <max value="0" /> <base> <path value="ContactPoint.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ContactPointUse" /> </extension> <strength value="required" /> <description value="Use of contact point." /> <valueSet value="http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN.2 - but often indicated by field" /> </mapping> <mapping> <identity value="rim" /> <map value="unique(./use)" /> </mapping> <mapping> <identity value="servd" /> <map value="./ContactPointPurpose" /> </mapping> </element> <element id="Person.telecom:fax.rank"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.rank" /> <short value="Specify preferred order of use (1 = highest)" /> <definition value="Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values." /> <comment value="Note that rank does not necessarily follow the order in which the contacts are represented in the instance." /> <min value="0" /> <max value="0" /> <base> <path value="ContactPoint.rank" /> <min value="0" /> <max value="1" /> </base> <type> <code value="positiveInt" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="n/a" /> </mapping> </element> <element id="Person.telecom:fax.period"> <path value="Person.telecom.period" /> <short value="Time period when the contact point was/is in use" /> <definition value="Time period when the contact point was/is in use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="0" /> <base> <path value="ContactPoint.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="./usablePeriod[type="IVL<TS>"]" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="Person.telecom:email"> <path value="Person.telecom" /> <sliceName value="email" /> <short value="A contact detail for the person" /> <definition value="A contact detail for the person, e.g. a telephone number or an email address." /> <comment value="Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification." /> <requirements value="People have (primary) ways to contact them in some way such as phone, email." /> <min value="0" /> <max value="1" /> <base> <path value="Person.telecom" /> <min value="0" /> <max value="*" /> </base> <type> <code value="ContactPoint" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="cpt-2" /> <severity value="error" /> <human value="A system is required if a value is provided." /> <expression value="value.empty() or system.exists()" /> <xpath value="not(exists(f:value)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/ContactPoint" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN" /> </mapping> <mapping> <identity value="rim" /> <map value="TEL" /> </mapping> <mapping> <identity value="servd" /> <map value="ContactPoint" /> </mapping> <mapping> <identity value="v2" /> <map value="PID-13, PID-14" /> </mapping> <mapping> <identity value="rim" /> <map value="./telecom" /> </mapping> </element> <element id="Person.telecom:email.id"> <path value="Person.telecom.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Person.telecom:email.extension"> <path value="Person.telecom.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Person.telecom:email.system"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.system" /> <short value="phone | fax | email | pager | url | sms | other" /> <definition value="Telecommunications form for contact point - what communications system is required to make use of the contact." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="1" /> <max value="1" /> <base> <path value="ContactPoint.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <fixedCode value="email" /> <condition value="ele-1" /> <condition value="cpt-2" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ContactPointSystem" /> </extension> <strength value="required" /> <description value="Telecommunications form for contact point." /> <valueSet value="http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./scheme" /> </mapping> <mapping> <identity value="servd" /> <map value="./ContactPointType" /> </mapping> </element> <element id="Person.telecom:email.value"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.value" /> <short value="The actual contact point details" /> <definition value="The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address)." /> <comment value="Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value." /> <requirements value="Need to support legacy numbers that are not in a tightly controlled format." /> <min value="1" /> <max value="1" /> <base> <path value="ContactPoint.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN.1 (or XTN.12)" /> </mapping> <mapping> <identity value="rim" /> <map value="./url" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="Person.telecom:email.use"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.use" /> <short value="home | work | temp | old | mobile - purpose of this contact point" /> <definition value="Identifies the purpose for the contact point." /> <comment value="Applications can assume that a contact is current unless it explicitly says that it is temporary or old." /> <requirements value="Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose." /> <min value="0" /> <max value="0" /> <base> <path value="ContactPoint.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ContactPointUse" /> </extension> <strength value="required" /> <description value="Use of contact point." /> <valueSet value="http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XTN.2 - but often indicated by field" /> </mapping> <mapping> <identity value="rim" /> <map value="unique(./use)" /> </mapping> <mapping> <identity value="servd" /> <map value="./ContactPointPurpose" /> </mapping> </element> <element id="Person.telecom:email.rank"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.rank" /> <short value="Specify preferred order of use (1 = highest)" /> <definition value="Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values." /> <comment value="Note that rank does not necessarily follow the order in which the contacts are represented in the instance." /> <min value="0" /> <max value="0" /> <base> <path value="ContactPoint.rank" /> <min value="0" /> <max value="1" /> </base> <type> <code value="positiveInt" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="n/a" /> </mapping> </element> <element id="Person.telecom:email.period"> <path value="Person.telecom.period" /> <short value="Time period when the contact point was/is in use" /> <definition value="Time period when the contact point was/is in use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="0" /> <base> <path value="ContactPoint.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="./usablePeriod[type="IVL<TS>"]" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="Person.gender"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.gender" /> <short value="male | female | other | unknown" /> <definition value="Administrative Gender." /> <comment value="The gender might not match the biological sex as determined by genetics, or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than M and F, though a clear majority of systems and contexts only support M and F." /> <requirements value="Needed for identification of the person, in combination with (at least) name and birth date. Gender of person drives many clinical processes." /> <min value="0" /> <max value="0" /> <base> <path value="Person.gender" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="AdministrativeGender" /> </extension> <strength value="required" /> <description value="The gender of a person used for administrative purposes." /> <valueSet value="http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="PID-8" /> </mapping> <mapping> <identity value="rim" /> <map value="player[classCode=PSN|ANM and determinerCode=INSTANCE]/administrativeGender" /> </mapping> </element> <element id="Person.birthDate"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.birthDate" /> <short value="The date on which the person was born" /> <definition value="The birth date for the person." /> <comment value="At least an estimated year should be provided as a guess if the real DOB is unknown." /> <requirements value="Age of person drives many clinical processes, and is often used in performing identification of the person. Times are not included so as to not confuse things with potential timezone issues." /> <min value="0" /> <max value="0" /> <base> <path value="Person.birthDate" /> <min value="0" /> <max value="1" /> </base> <type> <code value="date" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="PID-7" /> </mapping> <mapping> <identity value="rim" /> <map value="./birthTime" /> </mapping> </element> <element id="Person.address"> <path value="Person.address" /> <short value="One or more addresses for the person" /> <definition value="One or more addresses for the person." /> <comment value="Person may have multiple addresses with different uses or applicable periods." /> <requirements value="May need to keep track of person's addresses for contacting, billing or reporting requirements and also to help with identification." /> <min value="0" /> <max value="0" /> <base> <path value="Person.address" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Address" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XAD" /> </mapping> <mapping> <identity value="rim" /> <map value="AD" /> </mapping> <mapping> <identity value="servd" /> <map value="Address" /> </mapping> <mapping> <identity value="v2" /> <map value="PID-11" /> </mapping> <mapping> <identity value="rim" /> <map value="./addr" /> </mapping> </element> <element id="Person.photo"> <path value="Person.photo" /> <short value="Image of the person" /> <definition value="An image that can be displayed as a thumbnail of the person to enhance the identification of the individual." /> <comment value="When providing a summary view (for example with Observation.value[x]) Attachment should be represented with a brief display text such as "Signed Procedure Consent"." /> <min value="0" /> <max value="0" /> <base> <path value="Person.photo" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Attachment" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="att-1" /> <severity value="error" /> <human value="If the Attachment has data, it SHALL have a contentType" /> <expression value="data.empty() or contentType.exists()" /> <xpath value="not(exists(f:data)) or exists(f:contentType)" /> <source value="http://hl7.org/fhir/StructureDefinition/Attachment" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="ED/RP" /> </mapping> <mapping> <identity value="rim" /> <map value="ED" /> </mapping> <mapping> <identity value="v2" /> <map value="OBX-5 - needs a profile" /> </mapping> <mapping> <identity value="rim" /> <map value="player[classCode=PSN|ANM and determinerCode=INSTANCE]/desc" /> </mapping> </element> <element id="Person.managingOrganization"> <path value="Person.managingOrganization" /> <short value="The organization that is the custodian of the person record" /> <definition value="The organization that is the custodian of the person record." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <requirements value="Need to know who recognizes this person record, manages and updates it." /> <min value="0" /> <max value="0" /> <base> <path value="Person.managingOrganization" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="rim" /> <map value="scoper" /> </mapping> </element> <element id="Person.active"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.active" /> <short value="This person's record is in active use" /> <definition value="Whether this person's record is in active use." /> <requirements value="Need to be able to mark a person record as not to be used because it was created in error." /> <min value="0" /> <max value="1" /> <base> <path value="Person.active" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isModifier value="true" /> <isModifierReason value="This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.status" /> </mapping> <mapping> <identity value="rim" /> <map value="statusCode" /> </mapping> </element> <element id="Person.link"> <path value="Person.link" /> <short value="Link to a resource that concerns the same actual person" /> <definition value="Link to a resource that concerns the same actual person." /> <min value="0" /> <max value="0" /> <base> <path value="Person.link" /> <min value="0" /> <max value="*" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="outboundLink" /> </mapping> </element> <element id="Person.link.id"> <path value="Person.link.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Person.link.extension"> <path value="Person.link.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Person.link.modifierExtension"> <path value="Person.link.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Person.link.target"> <path value="Person.link.target" /> <short value="The resource to which this actual person is associated" /> <definition value="The resource to which this actual person is associated." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="1" /> <max value="1" /> <base> <path value="Person.link.target" /> <min value="1" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Person" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="rim" /> <map value="id" /> </mapping> </element> <element id="Person.link.assurance"> <path value="Person.link.assurance" /> <short value="level1 | level2 | level3 | level4" /> <definition value="Level of assurance that this link is associated with the target resource." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Person.link.assurance" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentityAssuranceLevel" /> </extension> <strength value="required" /> <description value="The level of confidence that this link represents the same actual person, based on NIST Authentication Levels." /> <valueSet value="http://hl7.org/fhir/ValueSet/identity-assuranceLevel|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="priorityNumber?" /> </mapping> </element> </snapshot> <differential> <element id="Person.meta"> <path value="Person.meta" /> <min value="1" /> </element> <element id="Person.meta.versionId"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.meta.versionId" /> <max value="0" /> </element> <element id="Person.meta.lastUpdated"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.meta.lastUpdated" /> <max value="0" /> </element> <element id="Person.meta.source"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.meta.source" /> <max value="0" /> </element> <element id="Person.meta.profile"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.meta.profile" /> <min value="1" /> <max value="1" /> <fixedCanonical value="https://fhir.gevko.de/StructureDefinition/EAHB_PR_Person_KH|0.9" /> </element> <element id="Person.meta.security"> <path value="Person.meta.security" /> <max value="0" /> </element> <element id="Person.meta.tag"> <path value="Person.meta.tag" /> <max value="0" /> </element> <element id="Person.implicitRules"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.implicitRules" /> <max value="0" /> </element> <element id="Person.language"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.language" /> <max value="0" /> </element> <element id="Person.text"> <path value="Person.text" /> <max value="0" /> </element> <element id="Person.contained"> <path value="Person.contained" /> <max value="0" /> </element> <element id="Person.identifier"> <path value="Person.identifier" /> <max value="0" /> </element> <element id="Person.name"> <path value="Person.name" /> <min value="1" /> <max value="1" /> </element> <element id="Person.name.use"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.name.use" /> <max value="0" /> </element> <element id="Person.name.text"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.name.text" /> <max value="0" /> </element> <element id="Person.name.family"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.name.family" /> <min value="1" /> </element> <element id="Person.name.given"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.name.given" /> <min value="1" /> <max value="1" /> </element> <element id="Person.name.prefix"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.name.prefix" /> <max value="0" /> </element> <element id="Person.name.suffix"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.name.suffix" /> <max value="0" /> </element> <element id="Person.name.period"> <path value="Person.name.period" /> <max value="0" /> </element> <element id="Person.telecom"> <path value="Person.telecom" /> <slicing> <discriminator> <type value="value" /> <path value="system" /> </discriminator> <rules value="closed" /> </slicing> <min value="1" /> <max value="2" /> </element> <element id="Person.telecom:phone"> <path value="Person.telecom" /> <sliceName value="phone" /> <short value="Telefon-Nr." /> <min value="1" /> <max value="1" /> </element> <element id="Person.telecom:phone.system"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.system" /> <min value="1" /> <fixedCode value="phone" /> </element> <element id="Person.telecom:phone.value"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.value" /> <min value="1" /> </element> <element id="Person.telecom:phone.use"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.use" /> <max value="0" /> </element> <element id="Person.telecom:phone.rank"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.rank" /> <max value="0" /> </element> <element id="Person.telecom:phone.period"> <path value="Person.telecom.period" /> <max value="0" /> </element> <element id="Person.telecom:fax"> <path value="Person.telecom" /> <sliceName value="fax" /> <short value="Fax-Nr." /> <max value="1" /> <mustSupport value="true" /> </element> <element id="Person.telecom:fax.system"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.system" /> <min value="1" /> <fixedCode value="fax" /> </element> <element id="Person.telecom:fax.value"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.value" /> <min value="1" /> </element> <element id="Person.telecom:fax.use"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.use" /> <max value="0" /> </element> <element id="Person.telecom:fax.rank"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.rank" /> <max value="0" /> </element> <element id="Person.telecom:fax.period"> <path value="Person.telecom.period" /> <max value="0" /> </element> <element id="Person.telecom:email"> <path value="Person.telecom" /> <sliceName value="email" /> <max value="1" /> <mustSupport value="true" /> </element> <element id="Person.telecom:email.system"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.system" /> <min value="1" /> <fixedCode value="email" /> </element> <element id="Person.telecom:email.value"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.value" /> <min value="1" /> </element> <element id="Person.telecom:email.use"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.use" /> <max value="0" /> </element> <element id="Person.telecom:email.rank"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.telecom.rank" /> <max value="0" /> </element> <element id="Person.telecom:email.period"> <path value="Person.telecom.period" /> <max value="0" /> </element> <element id="Person.gender"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.gender" /> <max value="0" /> </element> <element id="Person.birthDate"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.birthDate" /> <max value="0" /> </element> <element id="Person.address"> <path value="Person.address" /> <max value="0" /> </element> <element id="Person.photo"> <path value="Person.photo" /> <max value="0" /> </element> <element id="Person.managingOrganization"> <path value="Person.managingOrganization" /> <max value="0" /> </element> <element id="Person.active"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Person.active" /> <mustSupport value="true" /> </element> <element id="Person.link"> <path value="Person.link" /> <max value="0" /> </element> </differential> </StructureDefinition>