<status value="draft" /> <date value="2023-01-31" /> <publisher value="Kassenärztliche Bundesvereinigung (KBV)" /> <contact> <telecom> <system value="url" /> <value value="https://mio.kbv.de" /> </telecom> </contact> <contact> <name value="Forschungsgruppe Informatik im Gesundheitswesen" /> <telecom> <system value="url" /> <value value="https://www.hs-osnabrueck.de/forschungsgruppe-informatik-im-gesundheitswesen/" /> </telecom> </contact> <description value="Dieses Profil bildet die Nutzung von Wundauflagen und -verbänden" /> <copyright value="Im folgenden Profil können Codes aus den Code-Systemen SNOMED CT®, LOINC, Ucum, ATC, ICD-10-GM, ICD-10-WHO, OPS, Alpha-ID/Alpha-ID-SE und ICF enthalten sein, die dem folgenden Urheberrecht unterliegen: This material includes SNOMED CT® Clinical Terms® (SNOMED CT® CT®) which is used by permission of SNOMED CT® International. All rights reserved. SNOMED CT® CT®, was originally created by The College of American Pathologists. SNOMED CT® and SNOMED CT® CT are registered trademarks of SNOMED CT® International. Implementers of these artefacts must have the appropriate SNOMED CT® CT Affiliate license. This material contains content from LOINC (http://LOINC.org). LOINC is copyright © 1995-2020, Regenstrief Institute, Inc. and the Logical Observation Identifiers Names and Codes (LOINC) Committee and is available at no cost under the license at http://LOINC.org/license. LOINC® is a registered United States trademark of Regenstrief Institute, Inc. This product includes all or a portion of the UCUM table, UCUM codes, and UCUM definitions or is derived from it, subject to a license from Regenstrief Institute, Inc. and The UCUM Organization. Your use of the UCUM table, UCUM codes, UCUM definitions also is subject to this license, a copy of which is available at http://unitsofmeasure.org. The current complete UCUM table, UCUM Specification are available for download at http://unitsofmeasure.org. The UCUM table and UCUM codes are copyright © 1995-2009, Regenstrief Institute, Inc. and the Unified Codes for Units of Measures (UCUM) Organization. All rights reserved. THE UCUM TABLE (IN ALL FORMATS), UCUM DEFINITIONS, AND SPECIFICATION ARE PROVIDED 'AS IS.' ANY EXPRESS OR IMPLIED WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Dieses Material enthält Inhalte aus ATC. Die Erstellung erfolgte unter Verwendung der Datenträger der amtlichen Fassung der ATC-Klassifikation mit DDD des Bundesinstituts für Arzneimittel und Medizinprodukte (BfArM). Dieses Material enthält Inhalte aus ICD-10-GM, ICD-10-WHO, OPS Alpha-ID ans Alpha-ID-SE. Die Erstellung erfolgt unter Verwendung der maschinenlesbaren Fassung des Bundesinstituts für Arzneimittel und Medizinprodukte (BfArM). Dieses Material enthält Inhalte aus ICF. Die Erstellung erfolgt unter Verwendung der maschinenlesbaren Fassung des Deutschen Instituts für Medizinische Dokumentation und Information (DIMDI). ICF-Kodes, -Begriffe und -Texte © Weltgesundheitsorganisation, übersetzt und herausgegeben durch das Deutsche Institut für Medizinische Dokumentation und Information von der International classification of functioning, disability and health – ICF, herausgegeben durch die Weltgesundheitsorganisation." /> <fhirVersion value="4.0.1" /> <kind value="resource" /> <abstract value="false" /> <type value="DeviceUseStatement" /> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/DeviceUseStatement" /> <derivation value="constraint" /> <snapshot> <element id="DeviceUseStatement"> <path value="DeviceUseStatement" /> <short value="Record of use of a device" /> <definition value="A record of a device being used by a patient where the record is the result of a report from the patient or another clinician." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceUseStatement" /> <min value="0" /> <max value="*" /> </base> <constraint> <key value="dom-2" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources" /> <expression value="contained.contained.empty()" /> <xpath value="not(parent::f:contained and f:contained)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-4" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated" /> <expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-3" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource" /> <expression value="contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()" /> <xpath value="not(exists(for $id in f:contained/*/f:id/@value return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice"> <valueBoolean value="true" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation"> <valueMarkdown value="When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time." /> </extension> <key value="dom-6" /> <severity value="warning" /> <human value="A resource should have narrative for robust management" /> <expression value="text.`div`.exists()" /> <xpath value="exists(f:text/h:div)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-5" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a security label" /> <expression value="contained.meta.security.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:security))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event" /> </mapping> <mapping> <identity value="quick" /> <map value="DeviceUsePerformanceOccurrence" /> </mapping> </element> <element id="DeviceUseStatement.id"> <path value="DeviceUseStatement.id" /> <short value="Logical id of this artifact" /> <definition value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes." /> <comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <isSummary value="true" /> </element> <element id="DeviceUseStatement.meta"> <path value="DeviceUseStatement.meta" /> <short value="Metadata about the resource" /> <definition value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource." /> <min value="1" /> <max value="1" /> <base> <path value="Resource.meta" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.meta.id"> <path value="DeviceUseStatement.meta.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.meta.extension"> <path value="DeviceUseStatement.meta.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.meta.versionId"> <path value="DeviceUseStatement.meta.versionId" /> <short value="Version specific identifier" /> <definition value="The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted." /> <comment value="The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes." /> <min value="0" /> <max value="0" /> <base> <path value="Meta.versionId" /> <min value="0" /> <max value="1" /> </base> <type> <code value="id" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.meta.lastUpdated"> <path value="DeviceUseStatement.meta.lastUpdated" /> <short value="When the resource version last changed" /> <definition value="When the resource last changed - e.g. when the version changed." /> <comment value="This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a [read](http.html#read) interaction." /> <min value="0" /> <max value="0" /> <base> <path value="Meta.lastUpdated" /> <min value="0" /> <max value="1" /> </base> <type> <code value="instant" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.meta.source"> <path value="DeviceUseStatement.meta.source" /> <short value="Identifies where the resource comes from" /> <definition value="A uri that identifies the source system of the resource. This provides a minimal amount of [Provenance](provenance.html#) information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc." /> <comment value="In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL." /> <min value="0" /> <max value="0" /> <base> <path value="Meta.source" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.meta.profile"> <path value="DeviceUseStatement.meta.profile" /> <slicing> <discriminator> <type value="value" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <short value="Profiles this resource claims to conform to" /> <definition value="A list of profiles (references to [StructureDefinition](structuredefinition.html#) resources) that this resource claims to conform to. The URL is a reference to [StructureDefinition.url](structuredefinition-definitions.html#StructureDefinition.url)." /> <comment value="It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set." /> <min value="1" /> <max value="*" /> <base> <path value="Meta.profile" /> <min value="0" /> <max value="*" /> </base> <type> <code value="canonical" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/StructureDefinition" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.meta.profile:chw"> <path value="DeviceUseStatement.meta.profile" /> <sliceName value="chw" /> <short value="Profiles this resource claims to conform to" /> <definition value="A list of profiles (references to [StructureDefinition](structuredefinition.html#) resources) that this resource claims to conform to. The URL is a reference to [StructureDefinition.url](structuredefinition-definitions.html#StructureDefinition.url)." /> <comment value="It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set." /> <min value="1" /> <max value="1" /> <base> <path value="Meta.profile" /> <min value="0" /> <max value="*" /> </base> <type> <code value="canonical" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/StructureDefinition" /> </type> <patternCanonical value="https://fhir.kbv.de/StructureDefinition/KBV_PR_MIO_CHW_DeviceUseStatement_Wound_Dressing" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.meta.security"> <path value="DeviceUseStatement.meta.security" /> <short value="Security Labels applied to this resource" /> <definition value="Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure." /> <comment value="The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored." /> <min value="0" /> <max value="0" /> <base> <path value="Meta.security" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="SecurityLabels" /> </extension> <strength value="extensible" /> <description value="Security Labels from the Healthcare Privacy and Security Classification System." /> <valueSet value="http://hl7.org/fhir/ValueSet/security-labels" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="DeviceUseStatement.meta.tag"> <path value="DeviceUseStatement.meta.tag" /> <short value="Tags applied to this resource" /> <definition value="Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource." /> <comment value="The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored." /> <min value="0" /> <max value="0" /> <base> <path value="Meta.tag" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Tags" /> </extension> <strength value="example" /> <description value="Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones"." /> <valueSet value="http://hl7.org/fhir/ValueSet/common-tags" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="DeviceUseStatement.implicitRules"> <path value="DeviceUseStatement.implicitRules" /> <short value="A set of rules under which this content was created" /> <definition value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc." /> <comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc." /> <min value="0" /> <max value="0" /> <base> <path value="Resource.implicitRules" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.language"> <path value="DeviceUseStatement.language" /> <short value="Language of the resource content" /> <definition value="The base language in which the resource is written." /> <comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." /> <min value="0" /> <max value="0" /> <base> <path value="Resource.language" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet"> <valueCanonical value="http://hl7.org/fhir/ValueSet/all-languages" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Language" /> </extension> <strength value="preferred" /> <description value="A human language." /> <valueSet value="http://hl7.org/fhir/ValueSet/languages" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.text"> <path value="DeviceUseStatement.text" /> <short value="Text summary of the resource, for human interpretation" /> <definition value="In diesem Element können die in der Instanz enthaltenen Informationen in einer menschenlesbaren Form zusammengefasst werden. Dabei ist zu beachten, dass keine Informationen aufgenommen werden dürfen, die nicht in strukturierter Form an anderer Stelle in der Instanz enthalten sind." /> <comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later." /> <alias value="narrative" /> <alias value="html" /> <alias value="xhtml" /> <alias value="display" /> <min value="0" /> <max value="1" /> <base> <path value="DomainResource.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Narrative" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.text?" /> </mapping> </element> <element id="DeviceUseStatement.contained"> <path value="DeviceUseStatement.contained" /> <short value="Contained, inline Resources" /> <definition value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope." /> <comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels." /> <alias value="inline resources" /> <alias value="anonymous resources" /> <alias value="contained resources" /> <min value="0" /> <max value="0" /> <base> <path value="DomainResource.contained" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Resource" /> </type> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.extension"> <path value="DeviceUseStatement.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.modifierExtension"> <path value="DeviceUseStatement.modifierExtension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Extensions that cannot be ignored" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.identifier"> <path value="DeviceUseStatement.identifier" /> <short value="External identifier for this record" /> <definition value="An external identifier for this statement such as an IRI." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceUseStatement.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.identifier" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.identifier" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.identifier" /> </mapping> </element> <element id="DeviceUseStatement.basedOn"> <path value="DeviceUseStatement.basedOn" /> <short value="Fulfills plan, proposal or order" /> <definition value="A plan, proposal or order that is fulfilled in whole or in part by this DeviceUseStatement." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <requirements value="Allows tracing of authorization for the DeviceUseStatement and tracking whether proposals/recommendations were acted upon." /> <alias value="fulfills" /> <min value="0" /> <max value="0" /> <base> <path value="DeviceUseStatement.basedOn" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ServiceRequest" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.basedOn" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC in proximity to EVN segment" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=FLFS].target" /> </mapping> </element> <element id="DeviceUseStatement.status"> <path value="DeviceUseStatement.status" /> <short value="active | completed | entered-in-error +" /> <definition value="A code representing the patient or other source's judgment about the state of the device used that this statement is about. Generally this will be active or completed." /> <comment value="DeviceUseStatment is a statement at a point in time. The status is only representative at the point when it was asserted. The value set for contains codes that assert the status of the use by the patient (for example, stopped or on hold) as well as codes that assert the status of the resource itself (for example, entered in error). This element is labeled as a modifier because the status contains the codes that mark the statement as not currently valid." /> <min value="1" /> <max value="1" /> <base> <path value="DeviceUseStatement.status" /> <min value="1" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="DeviceUseStatementStatus" /> </extension> <strength value="required" /> <description value="A coded concept indicating the current status of the Device Usage." /> <valueSet value="http://hl7.org/fhir/ValueSet/device-statement-status|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.status" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.status" /> </mapping> <mapping> <identity value="rim" /> <map value=".statusCode" /> </mapping> <mapping> <identity value="quick" /> <map value="…status" /> </mapping> </element> <element id="DeviceUseStatement.subject"> <path value="DeviceUseStatement.subject" /> <short value="Der Patient, bei dem der Wundverband genutzt wurde." /> <definition value="The patient who used the device." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="1" /> <max value="1" /> <base> <path value="DeviceUseStatement.subject" /> <min value="1" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="https://fhir.kbv.de/StructureDefinition/KBV_PR_MIO_CHW_Patient|1.0.0" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.subject" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.subject[x]" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.subject" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.subject" /> </mapping> </element> <element id="DeviceUseStatement.subject.id"> <path value="DeviceUseStatement.subject.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.subject.extension"> <path value="DeviceUseStatement.subject.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.subject.reference"> <path value="DeviceUseStatement.subject.reference" /> <short value="Literal reference, Relative, internal or absolute URL" /> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources." /> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server." /> <min value="1" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.subject.type"> <path value="DeviceUseStatement.subject.type" /> <short value="Type the reference refers to (e.g. "Patient")" /> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)." /> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." /> <min value="0" /> <max value="0" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt" /> </extension> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.subject.identifier"> <path value="DeviceUseStatement.subject.identifier" /> <short value="Logical reference, when literal reference is not known" /> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference." /> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." /> <min value="0" /> <max value="0" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="DeviceUseStatement.subject.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="DeviceUseStatement.subject.display" /> <short value="Text alternative for the resource" /> <definition value="Plain text narrative that identifies the resource in addition to the resource reference." /> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it." /> <min value="0" /> <max value="0" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.derivedFrom"> <path value="DeviceUseStatement.derivedFrom" /> <short value="Supporting information" /> <definition value="Allows linking the DeviceUseStatement to the underlying Request, or to other information that supports or is used to derive the DeviceUseStatement." /> <comment value="The most common use cases for deriving a DeviceUseStatement comes from creating it from a request or from an observation or a claim. it should be noted that the amount of information that is available varies from the type resource that you derive the DeviceUseStatement from." /> <min value="0" /> <max value="0" /> <base> <path value="DeviceUseStatement.derivedFrom" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ServiceRequest" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Procedure" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Claim" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Observation" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/QuestionnaireResponse" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/DocumentReference" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> </element> <element id="DeviceUseStatement.timing[x]"> <path value="DeviceUseStatement.timing[x]" /> <short value="How often the device was used" /> <definition value="Hier werden Timing-Informationen zur Nutzung des Wundverband hinterlegt, in diesem Fall der Intervall für den Kompressionsverbandswechsel." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceUseStatement.timing[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Timing" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.occurrence[x]" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.done[x]" /> </mapping> <mapping> <identity value="quick" /> <map value="DeviceUse.applicationSchedule" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].id"> <path value="DeviceUseStatement.timing[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].extension"> <path value="DeviceUseStatement.timing[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].modifierExtension"> <path value="DeviceUseStatement.timing[x].modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].event"> <path value="DeviceUseStatement.timing[x].event" /> <short value="When the event occurs" /> <definition value="Identifies specific times when the event occurs." /> <requirements value="In a Medication Administration Record, for instance, you need to take a general specification, and turn it into a precise specification." /> <min value="0" /> <max value="0" /> <base> <path value="Timing.event" /> <min value="0" /> <max value="*" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="QLIST<TS>" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat"> <path value="DeviceUseStatement.timing[x].repeat" /> <short value="Angabe, dass X Mal alle Y Tage der Verband "angewendet", also gewechselt wurde" /> <definition value="A set of rules that describe when the event is scheduled." /> <requirements value="Many timing schedules are determined by regular repetitions." /> <min value="1" /> <max value="1" /> <base> <path value="Timing.repeat" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Element" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="tim-9" /> <severity value="error" /> <human value="If there's an offset, there must be a when (and not C, CM, CD, CV)" /> <expression value="offset.empty() or (when.exists() and ((when in ('C' | 'CM' | 'CD' | 'CV')).not()))" /> <xpath value="not(exists(f:offset)) or exists(f:when)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-5" /> <severity value="error" /> <human value="period SHALL be a non-negative value" /> <expression value="period.exists() implies period >= 0" /> <xpath value="f:period/@value >= 0 or not(f:period/@value)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-6" /> <severity value="error" /> <human value="If there's a periodMax, there must be a period" /> <expression value="periodMax.empty() or period.exists()" /> <xpath value="not(exists(f:periodMax)) or exists(f:period)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-7" /> <severity value="error" /> <human value="If there's a durationMax, there must be a duration" /> <expression value="durationMax.empty() or duration.exists()" /> <xpath value="not(exists(f:durationMax)) or exists(f:duration)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-8" /> <severity value="error" /> <human value="If there's a countMax, there must be a count" /> <expression value="countMax.empty() or count.exists()" /> <xpath value="not(exists(f:countMax)) or exists(f:count)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-1" /> <severity value="error" /> <human value="if there's a duration, there needs to be duration units" /> <expression value="duration.empty() or durationUnit.exists()" /> <xpath value="not(exists(f:duration)) or exists(f:durationUnit)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-10" /> <severity value="error" /> <human value="If there's a timeOfDay, there cannot be a when, or vice versa" /> <expression value="timeOfDay.empty() or when.empty()" /> <xpath value="not(exists(f:timeOfDay)) or not(exists(f:when))" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-2" /> <severity value="error" /> <human value="if there's a period, there needs to be period units" /> <expression value="period.empty() or periodUnit.exists()" /> <xpath value="not(exists(f:period)) or exists(f:periodUnit)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-4" /> <severity value="error" /> <human value="duration SHALL be a non-negative value" /> <expression value="duration.exists() implies duration >= 0" /> <xpath value="f:duration/@value >= 0 or not(f:duration/@value)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="Implies PIVL or EIVL" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.id"> <path value="DeviceUseStatement.timing[x].repeat.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.extension"> <path value="DeviceUseStatement.timing[x].repeat.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.bounds[x]"> <path value="DeviceUseStatement.timing[x].repeat.bounds[x]" /> <short value="Length/Range of lengths, or (Start and/or end) limits" /> <definition value="Either a duration for the length of the timing schedule, a range of possible length, or outer bounds for start and/or end limits of the timing schedule." /> <min value="0" /> <max value="0" /> <base> <path value="Timing.repeat.bounds[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Duration" /> </type> <type> <code value="Range" /> </type> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL(TS) used in a QSI" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.count"> <path value="DeviceUseStatement.timing[x].repeat.count" /> <short value="Number of times to repeat" /> <definition value="A total count of the desired number of repetitions across the duration of the entire timing specification. If countMax is present, this element indicates the lower bound of the allowed range of count values." /> <comment value="If you have both bounds and count, then this should be understood as within the bounds period, until count times happens." /> <requirements value="Repetitions may be limited by end time or total occurrences." /> <min value="0" /> <max value="0" /> <base> <path value="Timing.repeat.count" /> <min value="0" /> <max value="1" /> </base> <type> <code value="positiveInt" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.count" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.countMax"> <path value="DeviceUseStatement.timing[x].repeat.countMax" /> <short value="Maximum number of times to repeat" /> <definition value="If present, indicates that the count is a range - so to perform the action between [count] and [countMax] times." /> <comment value="32 bit number; for values larger than this, use decimal" /> <min value="0" /> <max value="0" /> <base> <path value="Timing.repeat.countMax" /> <min value="0" /> <max value="1" /> </base> <type> <code value="positiveInt" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.count" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.duration"> <path value="DeviceUseStatement.timing[x].repeat.duration" /> <short value="How long when it happens" /> <definition value="How long this thing happens for when it happens. If durationMax is present, this element indicates the lower bound of the allowed range of the duration." /> <comment value="For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise)." /> <requirements value="Some activities are not instantaneous and need to be maintained for a period of time." /> <min value="0" /> <max value="0" /> <base> <path value="Timing.repeat.duration" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.durationMax"> <path value="DeviceUseStatement.timing[x].repeat.durationMax" /> <short value="How long when it happens (Max)" /> <definition value="If present, indicates that the duration is a range - so to perform the action between [duration] and [durationMax] time length." /> <comment value="For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise)." /> <requirements value="Some activities are not instantaneous and need to be maintained for a period of time." /> <min value="0" /> <max value="0" /> <base> <path value="Timing.repeat.durationMax" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.durationUnit"> <path value="DeviceUseStatement.timing[x].repeat.durationUnit" /> <short value="s | min | h | d | wk | mo | a - unit of time (UCUM)" /> <definition value="The units of time for the duration, in UCUM units." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="0" /> <base> <path value="Timing.repeat.durationUnit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="UnitsOfTime" /> </extension> <strength value="required" /> <description value="A unit of time (units from UCUM)." /> <valueSet value="http://hl7.org/fhir/ValueSet/units-of-time|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase.unit" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.frequency"> <path value="DeviceUseStatement.timing[x].repeat.frequency" /> <short value="X Mal alle Y Tage / X mal in Y Wochen - hier steht X" /> <definition value="The number of times to repeat the action within the specified period. If frequencyMax is present, this element indicates the lower bound of the allowed range of the frequency." /> <comment value="32 bit number; for values larger than this, use decimal" /> <min value="1" /> <max value="1" /> <base> <path value="Timing.repeat.frequency" /> <min value="0" /> <max value="1" /> </base> <type> <code value="positiveInt" /> </type> <meaningWhenMissing value="If no frequency is stated, the assumption is that the event occurs once per period, but systems SHOULD always be specific about this" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.frequencyMax"> <path value="DeviceUseStatement.timing[x].repeat.frequencyMax" /> <short value="Event occurs up to frequencyMax times per period" /> <definition value="If present, indicates that the frequency is a range - so to repeat between [frequency] and [frequencyMax] times within the period or period range." /> <comment value="32 bit number; for values larger than this, use decimal" /> <min value="0" /> <max value="0" /> <base> <path value="Timing.repeat.frequencyMax" /> <min value="0" /> <max value="1" /> </base> <type> <code value="positiveInt" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.period"> <path value="DeviceUseStatement.timing[x].repeat.period" /> <short value="X Mal alle Y Tage / X mal in Y Wochen - hier steht Y" /> <definition value="Indicates the duration of time over which repetitions are to occur; e.g. to express "3 times per day", 3 would be the frequency and "1 day" would be the period. If periodMax is present, this element indicates the lower bound of the allowed range of the period length." /> <comment value="Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)" /> <min value="1" /> <max value="1" /> <base> <path value="Timing.repeat.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.periodMax"> <path value="DeviceUseStatement.timing[x].repeat.periodMax" /> <short value="Upper limit of period (3-4 hours)" /> <definition value="If present, indicates that the period is a range from [period] to [periodMax], allowing expressing concepts such as "do this once every 3-5 days." /> <comment value="Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)" /> <min value="0" /> <max value="0" /> <base> <path value="Timing.repeat.periodMax" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.periodUnit"> <path value="DeviceUseStatement.timing[x].repeat.periodUnit" /> <short value="X Mal alle Y Tage / X mal in Y Wochen - hier steht "Tage oder Wochen"" /> <definition value="The units of time for the period in UCUM units." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="1" /> <max value="1" /> <base> <path value="Timing.repeat.periodUnit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="UnitsOfTime" /> </extension> <strength value="required" /> <description value="A unit of time (units from UCUM)." /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_MIO_CHW_Dressing_Change_Units|1.0.0" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase.unit" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.dayOfWeek"> <path value="DeviceUseStatement.timing[x].repeat.dayOfWeek" /> <short value="mon | tue | wed | thu | fri | sat | sun" /> <definition value="If one or more days of week is provided, then the action happens only on the specified day(s)." /> <comment value="If no days are specified, the action is assumed to happen every day as otherwise specified. The elements frequency and period cannot be used as well as dayOfWeek." /> <min value="0" /> <max value="0" /> <base> <path value="Timing.repeat.dayOfWeek" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="DayOfWeek" /> </extension> <strength value="required" /> <valueSet value="http://hl7.org/fhir/ValueSet/days-of-week|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.timeOfDay"> <path value="DeviceUseStatement.timing[x].repeat.timeOfDay" /> <short value="Time of day for action" /> <definition value="Specified time of day for action to take place." /> <comment value="When time of day is specified, it is inferred that the action happens every day (as filtered by dayofWeek) on the specified times. The elements when, frequency and period cannot be used as well as timeOfDay." /> <min value="0" /> <max value="0" /> <base> <path value="Timing.repeat.timeOfDay" /> <min value="0" /> <max value="*" /> </base> <type> <code value="time" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.when"> <path value="DeviceUseStatement.timing[x].repeat.when" /> <short value="Code for time period of occurrence" /> <definition value="An approximate time period during the day, potentially linked to an event of daily living that indicates when the action should occur." /> <comment value="When more than one event is listed, the event is tied to the union of the specified events." /> <requirements value="Timings are frequently determined by occurrences such as waking, eating and sleep." /> <min value="0" /> <max value="0" /> <base> <path value="Timing.repeat.when" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="EventTiming" /> </extension> <strength value="required" /> <description value="Real world event relating to the schedule." /> <valueSet value="http://hl7.org/fhir/ValueSet/event-timing|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="EIVL.event" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].repeat.offset"> <path value="DeviceUseStatement.timing[x].repeat.offset" /> <short value="Minutes from event (before or after)" /> <definition value="The number of minutes from the event. If the event code does not indicate whether the minutes is before or after the event, then the offset is assumed to be after the event." /> <comment value="32 bit number; for values larger than this, use decimal" /> <min value="0" /> <max value="0" /> <base> <path value="Timing.repeat.offset" /> <min value="0" /> <max value="1" /> </base> <type> <code value="unsignedInt" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="EIVL.offset" /> </mapping> </element> <element id="DeviceUseStatement.timing[x].code"> <path value="DeviceUseStatement.timing[x].code" /> <short value="BID | TID | QID | AM | PM | QD | QOD | +" /> <definition value="A code for the timing schedule (or just text in code.text). Some codes such as BID are ubiquitous, but many institutions define their own additional codes. If a code is provided, the code is understood to be a complete statement of whatever is specified in the structured timing data, and either the code or the data may be used to interpret the Timing, with the exception that .repeat.bounds still applies over the code (and is not contained in the code)." /> <comment value="BID etc. are defined as 'at institutionally specified times'. For example, an institution may choose that BID is "always at 7am and 6pm". If it is inappropriate for this choice to be made, the code BID should not be used. Instead, a distinct organization-specific code should be used in place of the HL7-defined BID code and/or a structured representation should be used (in this case, specifying the two event times)." /> <min value="0" /> <max value="0" /> <base> <path value="Timing.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="TimingAbbreviation" /> </extension> <strength value="preferred" /> <description value="Code for a known / defined timing pattern." /> <valueSet value="http://hl7.org/fhir/ValueSet/timing-abbreviation" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="rim" /> <map value="QSC.code" /> </mapping> </element> <element id="DeviceUseStatement.recordedOn"> <path value="DeviceUseStatement.recordedOn" /> <short value="When statement was recorded" /> <definition value="The time at which the statement was made/recorded." /> <min value="0" /> <max value="0" /> <base> <path value="DeviceUseStatement.recordedOn" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.recorded" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.statementDateTime" /> </mapping> </element> <element id="DeviceUseStatement.source"> <path value="DeviceUseStatement.source" /> <short value="Who made the statement" /> <definition value="Who reported the device was being used by the patient." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="0" /> <base> <path value="DeviceUseStatement.source" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.performer.actor" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.actor" /> </mapping> </element> <element id="DeviceUseStatement.device"> <path value="DeviceUseStatement.device" /> <short value="Hier wird der Wundverband angegeben, der genutzt wird." /> <definition value="The details of the device used." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="1" /> <max value="1" /> <base> <path value="DeviceUseStatement.device" /> <min value="1" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="https://fhir.kbv.de/StructureDefinition/KBV_PR_MIO_CHW_Device_Secondary_Dressing|1.0.0" /> <targetProfile value="https://fhir.kbv.de/StructureDefinition/KBV_PR_MIO_CHW_Device_Primary_Dressing|1.0.0" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.actor" /> </mapping> <mapping> <identity value="quick" /> <map value="DeviceUse.device" /> </mapping> </element> <element id="DeviceUseStatement.device.id"> <path value="DeviceUseStatement.device.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.device.extension"> <path value="DeviceUseStatement.device.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.device.reference"> <path value="DeviceUseStatement.device.reference" /> <short value="Literal reference, Relative, internal or absolute URL" /> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources." /> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server." /> <min value="1" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.device.type"> <path value="DeviceUseStatement.device.type" /> <short value="Type the reference refers to (e.g. "Patient")" /> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)." /> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." /> <min value="0" /> <max value="0" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt" /> </extension> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.device.identifier"> <path value="DeviceUseStatement.device.identifier" /> <short value="Logical reference, when literal reference is not known" /> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference." /> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." /> <min value="0" /> <max value="0" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="DeviceUseStatement.device.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="DeviceUseStatement.device.display" /> <short value="Text alternative for the resource" /> <definition value="Plain text narrative that identifies the resource in addition to the resource reference." /> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it." /> <min value="0" /> <max value="0" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.reasonCode"> <path value="DeviceUseStatement.reasonCode" /> <short value="Why device was used" /> <definition value="Reason or justification for the use of the device." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <min value="0" /> <max value="0" /> <base> <path value="DeviceUseStatement.reasonCode" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.reasonCode" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.why[x]" /> </mapping> <mapping> <identity value="quick" /> <map value="Action.indication.reason" /> </mapping> </element> <element id="DeviceUseStatement.reasonReference"> <path value="DeviceUseStatement.reasonReference" /> <short value="Referenz auf die Wunde" /> <definition value="Hier wird der Grund für die Nutzung des Wundverband genannt, in diesem Fall die Wunde." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="1" /> <max value="1" /> <base> <path value="DeviceUseStatement.reasonReference" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="https://fhir.kbv.de/StructureDefinition/KBV_PR_MIO_CHW_Condition_Wound|1.0.0" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.reasonReference" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.why[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="EVN.4 or by domain" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=RSON].target" /> </mapping> </element> <element id="DeviceUseStatement.reasonReference.id"> <path value="DeviceUseStatement.reasonReference.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceUseStatement.reasonReference.extension"> <path value="DeviceUseStatement.reasonReference.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.reasonReference.reference"> <path value="DeviceUseStatement.reasonReference.reference" /> <short value="Literal reference, Relative, internal or absolute URL" /> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources." /> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server." /> <min value="1" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.reasonReference.type"> <path value="DeviceUseStatement.reasonReference.type" /> <short value="Type the reference refers to (e.g. "Patient")" /> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)." /> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." /> <min value="0" /> <max value="0" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt" /> </extension> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.reasonReference.identifier"> <path value="DeviceUseStatement.reasonReference.identifier" /> <short value="Logical reference, when literal reference is not known" /> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference." /> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." /> <min value="0" /> <max value="0" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="DeviceUseStatement.reasonReference.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="DeviceUseStatement.reasonReference.display" /> <short value="Text alternative for the resource" /> <definition value="Plain text narrative that identifies the resource in addition to the resource reference." /> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it." /> <min value="0" /> <max value="0" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceUseStatement.bodySite"> <path value="DeviceUseStatement.bodySite" /> <short value="Target body site" /> <definition value="Indicates the anotomic location on the subject's body where the device was used ( i.e. the target)." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <requirements value="Knowing where the device is targeted is important for tracking if multiple sites are possible. If more information than just a code is required, use the extension [http://hl7.org/fhir/StructureDefinition/bodySite](null.html)." /> <min value="0" /> <max value="0" /> <base> <path value="DeviceUseStatement.bodySite" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="BodySite" /> </extension> <strength value="example" /> <description value="Codes describing anatomical locations. May include laterality." /> <valueSet value="http://hl7.org/fhir/ValueSet/body-site" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.note" /> </mapping> <mapping> <identity value="rim" /> <map value="targetSiteCode" /> </mapping> </element> <element id="DeviceUseStatement.note"> <path value="DeviceUseStatement.note" /> <short value="Addition details (comments, instructions)" /> <definition value="Details about the device statement that were not represented at all or sufficiently in one of the attributes provided in a class. These may include for example a comment, an instruction, or a note associated with the statement." /> <comment value="For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. *Annotations SHOULD NOT* be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible)." /> <min value="0" /> <max value="0" /> <base> <path value="DeviceUseStatement.note" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Annotation" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.note" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.additionalText" /> </mapping> </element> </snapshot> <differential> <element id="DeviceUseStatement.meta"> <path value="DeviceUseStatement.meta" /> <min value="1" /> </element> <element id="DeviceUseStatement.meta.versionId"> <path value="DeviceUseStatement.meta.versionId" /> <max value="0" /> </element> <element id="DeviceUseStatement.meta.lastUpdated"> <path value="DeviceUseStatement.meta.lastUpdated" /> <max value="0" /> </element> <element id="DeviceUseStatement.meta.source"> <path value="DeviceUseStatement.meta.source" /> <max value="0" /> </element> <element id="DeviceUseStatement.meta.profile"> <path value="DeviceUseStatement.meta.profile" /> <slicing> <discriminator> <type value="value" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <min value="1" /> </element> <element id="DeviceUseStatement.meta.profile:chw"> <path value="DeviceUseStatement.meta.profile" /> <sliceName value="chw" /> <min value="1" /> <max value="1" /> <patternCanonical value="https://fhir.kbv.de/StructureDefinition/KBV_PR_MIO_CHW_DeviceUseStatement_Wound_Dressing" /> </element> <element id="DeviceUseStatement.meta.security"> <path value="DeviceUseStatement.meta.security" /> <max value="0" /> </element> <element id="DeviceUseStatement.meta.tag"> <path value="DeviceUseStatement.meta.tag" /> <max value="0" /> </element> <element id="DeviceUseStatement.implicitRules"> <path value="DeviceUseStatement.implicitRules" /> <max value="0" /> </element> <element id="DeviceUseStatement.language"> <path value="DeviceUseStatement.language" /> <max value="0" /> </element> <element id="DeviceUseStatement.text"> <path value="DeviceUseStatement.text" /> <definition value="In diesem Element können die in der Instanz enthaltenen Informationen in einer menschenlesbaren Form zusammengefasst werden. Dabei ist zu beachten, dass keine Informationen aufgenommen werden dürfen, die nicht in strukturierter Form an anderer Stelle in der Instanz enthalten sind." /> </element> <element id="DeviceUseStatement.contained"> <path value="DeviceUseStatement.contained" /> <max value="0" /> </element> <element id="DeviceUseStatement.basedOn"> <path value="DeviceUseStatement.basedOn" /> <max value="0" /> </element> <element id="DeviceUseStatement.subject"> <path value="DeviceUseStatement.subject" /> <short value="Der Patient, bei dem der Wundverband genutzt wurde." /> <type> <code value="Reference" /> <targetProfile value="https://fhir.kbv.de/StructureDefinition/KBV_PR_MIO_CHW_Patient|1.0.0" /> </type> <mustSupport value="true" /> </element> <element id="DeviceUseStatement.subject.reference"> <path value="DeviceUseStatement.subject.reference" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="DeviceUseStatement.subject.type"> <path value="DeviceUseStatement.subject.type" /> <max value="0" /> </element> <element id="DeviceUseStatement.subject.identifier"> <path value="DeviceUseStatement.subject.identifier" /> <max value="0" /> </element> <element id="DeviceUseStatement.subject.display"> <path value="DeviceUseStatement.subject.display" /> <max value="0" /> </element> <element id="DeviceUseStatement.derivedFrom"> <path value="DeviceUseStatement.derivedFrom" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x]"> <path value="DeviceUseStatement.timing[x]" /> <definition value="Hier werden Timing-Informationen zur Nutzung des Wundverband hinterlegt, in diesem Fall der Intervall für den Kompressionsverbandswechsel." /> <type> <code value="Timing" /> </type> <mustSupport value="true" /> </element> <element id="DeviceUseStatement.timing[x].event"> <path value="DeviceUseStatement.timing[x].event" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].repeat"> <path value="DeviceUseStatement.timing[x].repeat" /> <short value="Angabe, dass X Mal alle Y Tage der Verband "angewendet", also gewechselt wurde" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="DeviceUseStatement.timing[x].repeat.bounds[x]"> <path value="DeviceUseStatement.timing[x].repeat.bounds[x]" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].repeat.count"> <path value="DeviceUseStatement.timing[x].repeat.count" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].repeat.countMax"> <path value="DeviceUseStatement.timing[x].repeat.countMax" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].repeat.duration"> <path value="DeviceUseStatement.timing[x].repeat.duration" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].repeat.durationMax"> <path value="DeviceUseStatement.timing[x].repeat.durationMax" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].repeat.durationUnit"> <path value="DeviceUseStatement.timing[x].repeat.durationUnit" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].repeat.frequency"> <path value="DeviceUseStatement.timing[x].repeat.frequency" /> <short value="X Mal alle Y Tage / X mal in Y Wochen - hier steht X" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="DeviceUseStatement.timing[x].repeat.frequencyMax"> <path value="DeviceUseStatement.timing[x].repeat.frequencyMax" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].repeat.period"> <path value="DeviceUseStatement.timing[x].repeat.period" /> <short value="X Mal alle Y Tage / X mal in Y Wochen - hier steht Y" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="DeviceUseStatement.timing[x].repeat.periodMax"> <path value="DeviceUseStatement.timing[x].repeat.periodMax" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].repeat.periodUnit"> <path value="DeviceUseStatement.timing[x].repeat.periodUnit" /> <short value="X Mal alle Y Tage / X mal in Y Wochen - hier steht "Tage oder Wochen"" /> <min value="1" /> <mustSupport value="true" /> <binding> <strength value="required" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_MIO_CHW_Dressing_Change_Units|1.0.0" /> </binding> </element> <element id="DeviceUseStatement.timing[x].repeat.dayOfWeek"> <path value="DeviceUseStatement.timing[x].repeat.dayOfWeek" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].repeat.timeOfDay"> <path value="DeviceUseStatement.timing[x].repeat.timeOfDay" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].repeat.when"> <path value="DeviceUseStatement.timing[x].repeat.when" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].repeat.offset"> <path value="DeviceUseStatement.timing[x].repeat.offset" /> <max value="0" /> </element> <element id="DeviceUseStatement.timing[x].code"> <path value="DeviceUseStatement.timing[x].code" /> <max value="0" /> </element> <element id="DeviceUseStatement.recordedOn"> <path value="DeviceUseStatement.recordedOn" /> <max value="0" /> </element> <element id="DeviceUseStatement.source"> <path value="DeviceUseStatement.source" /> <max value="0" /> </element> <element id="DeviceUseStatement.device"> <path value="DeviceUseStatement.device" /> <short value="Hier wird der Wundverband angegeben, der genutzt wird." /> <type> <code value="Reference" /> <targetProfile value="https://fhir.kbv.de/StructureDefinition/KBV_PR_MIO_CHW_Device_Secondary_Dressing|1.0.0" /> <targetProfile value="https://fhir.kbv.de/StructureDefinition/KBV_PR_MIO_CHW_Device_Primary_Dressing|1.0.0" /> </type> <mustSupport value="true" /> </element> <element id="DeviceUseStatement.device.reference"> <path value="DeviceUseStatement.device.reference" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="DeviceUseStatement.device.type"> <path value="DeviceUseStatement.device.type" /> <max value="0" /> </element> <element id="DeviceUseStatement.device.identifier"> <path value="DeviceUseStatement.device.identifier" /> <max value="0" /> </element> <element id="DeviceUseStatement.device.display"> <path value="DeviceUseStatement.device.display" /> <max value="0" /> </element> <element id="DeviceUseStatement.reasonCode"> <path value="DeviceUseStatement.reasonCode" /> <max value="0" /> </element> <element id="DeviceUseStatement.reasonReference"> <path value="DeviceUseStatement.reasonReference" /> <short value="Referenz auf die Wunde" /> <definition value="Hier wird der Grund für die Nutzung des Wundverband genannt, in diesem Fall die Wunde." /> <min value="1" /> <max value="1" /> <type> <code value="Reference" /> <targetProfile value="https://fhir.kbv.de/StructureDefinition/KBV_PR_MIO_CHW_Condition_Wound|1.0.0" /> </type> <mustSupport value="true" /> </element> <element id="DeviceUseStatement.reasonReference.reference"> <path value="DeviceUseStatement.reasonReference.reference" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="DeviceUseStatement.reasonReference.type"> <path value="DeviceUseStatement.reasonReference.type" /> <max value="0" /> </element> <element id="DeviceUseStatement.reasonReference.identifier"> <path value="DeviceUseStatement.reasonReference.identifier" /> <max value="0" /> </element> <element id="DeviceUseStatement.reasonReference.display"> <path value="DeviceUseStatement.reasonReference.display" /> <max value="0" /> </element> <element id="DeviceUseStatement.bodySite"> <path value="DeviceUseStatement.bodySite" /> <max value="0" /> </element> <element id="DeviceUseStatement.note"> <path value="DeviceUseStatement.note" /> <max value="0" /> </element> </differential> </StructureDefinition>