<status value="active" /> <publisher value="Nictiz" /> <contact> <name value="Nictiz" /> <telecom> <system value="email" /> <value value="info@nictiz.nl" /> <use value="work" /> </telecom> </contact> <description value="MedicalDevice Request as defined by the Dutch Health and Care Information model for PlannedCareActivity (Dutch: Zorginformatiebouwsteen or ZIB) version 3.1, release 2017." /> <purpose value="Recording planned appointments, referrals, treatments, diagnostic procedures, open orders and orders of which the results are not yet known gives every recipient, user or healthcare facility insight in the planned healthcare for this patient. This can prevent situations in which diagnostics and treatment can conflict with each other. This will give the recipient the option to place an order, cancel the order or act in any other way in accordance with their own policy. For orders that do not yet have results, the recipient is informed of the fact that potentially relevant results will be made available (which have to be requested)." /> <copyright value="CC0" /> <fhirVersion value="3.0.2" /> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v1.2.1-2015EN" /> <uri value="https://zibs.nl/wiki/PlannedCareActivityForTransfer-v1.2.1(2015EN)" /> <name value="HCIM PlannedCareActivityForTransfer-v1.2.1(2015EN)" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.0-2016EN" /> <uri value="https://zibs.nl/wiki/PlannedCareActivityForTransfer-v3.0(2016EN)" /> <name value="HCIM PlannedCareActivityForTransfer-v3.0(2016EN)" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.1-2017EN" /> <uri value="https://zibs.nl/wiki/PlannedCareActivityForTransfer-v3.1(2017EN)" /> <name value="HCIM PlannedCareActivityForTransfer-v3.1(2017EN)" /> </mapping> <mapping> <identity value="hcim-medicaldevice-v1.2-2015EN" /> <uri value="https://zibs.nl/wiki/MedicalDevice-v1.2(2015EN)" /> <name value="HCIM MedicalDevice-v1.2(2015EN)" /> </mapping> <mapping> <identity value="hcim-medicaldevice-v3.0-2016EN" /> <uri value="https://zibs.nl/wiki/MedicalDevice-v3.0(2016EN)" /> <name value="HCIM MedicalDevice-v3.0(2016EN)" /> </mapping> <mapping> <identity value="hcim-medicaldevice-v3.1-2017EN" /> <uri value="https://zibs.nl/wiki/MedicalDevice-v3.1(2017EN)" /> <name value="HCIM MedicalDevice-v3.1(2017EN)" /> </mapping> <mapping> <identity value="hcim-healthprofessional-v1.2.1-2015EN" /> <uri value="https://zibs.nl/wiki/HealthProfessional-v1.2.1(2015EN)" /> <name value="HCIM HealthProfessional-v1.2.1(2015EN)" /> </mapping> <mapping> <identity value="hcim-healthprofessional-v3.0-2016EN" /> <uri value="https://zibs.nl/wiki/HealthProfessional-v3.0(2016EN)" /> <name value="HCIM HealthProfessional-v3.0(2016EN)" /> </mapping> <mapping> <identity value="hcim-healthprofessional-v3.2-2017EN" /> <uri value="https://zibs.nl/wiki/HealthProfessional-v3.2(2017EN)" /> <name value="HCIM HealthProfessional-v3.2(2017EN)" /> </mapping> <mapping> <identity value="hcim-basicelements-v1.0-2017EN" /> <uri value="https://zibs.nl/wiki/BasicElements-v1.0(2017EN)" /> <name value="HCIM BasicElements-v1.0(2017EN)" /> </mapping> <kind value="resource" /> <abstract value="false" /> <type value="DeviceRequest" /> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/DeviceRequest" /> <derivation value="constraint" /> <snapshot> <element id="DeviceRequest"> <path value="DeviceRequest" /> <short value="Medical device request" /> <definition value="Represents a request for a patient to employ a medical device. The device may be an implantable device, or an external assistive device, such as a walker." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest" /> <min value="0" /> <max value="*" /> </base> <constraint> <key value="dom-2" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources" /> <expression value="contained.contained.empty()" /> <xpath value="not(parent::f:contained and f:contained)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-4" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated" /> <expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-3" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource" /> <expression value="contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()" /> <xpath value="not(exists(for $id in f:contained/*/f:id/@value return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice"> <valueBoolean value="true" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation"> <valueMarkdown value="When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time." /> </extension> <key value="dom-6" /> <severity value="warning" /> <human value="A resource should have narrative for robust management" /> <expression value="text.`div`.exists()" /> <xpath value="exists(f:text/h:div)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-5" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a security label" /> <expression value="contained.meta.security.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:security))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC" /> </mapping> <mapping> <identity value="rim" /> <map value="Act[moodCode<=INT]" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v1.2.1-2015EN" /> <map value="NL-CM:16.1.7" /> <comment value="MedicalAid" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.0-2016EN" /> <map value="NL-CM:16.1.7" /> <comment value="MedicalAid" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.1-2017EN" /> <map value="NL-CM:16.1.7" /> <comment value="MedicalDevice" /> </mapping> </element> <element id="DeviceRequest.id"> <path value="DeviceRequest.id" /> <short value="Logical id of this artifact" /> <definition value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes." /> <comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="id" /> </extension> <code value="id" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.meta"> <path value="DeviceRequest.meta" /> <short value="Metadata about the resource" /> <definition value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.meta" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.implicitRules"> <path value="DeviceRequest.implicitRules" /> <short value="A set of rules under which this content was created" /> <definition value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc." /> <comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.implicitRules" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.language"> <path value="DeviceRequest.language" /> <short value="Language of the resource content" /> <definition value="The base language in which the resource is written." /> <comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.language" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet"> <valueCanonical value="http://hl7.org/fhir/ValueSet/all-languages" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Language" /> </extension> <strength value="preferred" /> <description value="A human language." /> <valueSet value="http://hl7.org/fhir/ValueSet/languages" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.text"> <path value="DeviceRequest.text" /> <short value="Text summary of the resource, for human interpretation" /> <definition value="A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety." /> <comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later." /> <alias value="narrative" /> <alias value="html" /> <alias value="xhtml" /> <alias value="display" /> <min value="0" /> <max value="1" /> <base> <path value="DomainResource.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Narrative" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.text?" /> </mapping> </element> <element id="DeviceRequest.contained"> <path value="DeviceRequest.contained" /> <short value="Contained, inline Resources" /> <definition value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope." /> <comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels." /> <alias value="inline resources" /> <alias value="anonymous resources" /> <alias value="contained resources" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.contained" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Resource" /> </type> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.extension"> <path value="DeviceRequest.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.modifierExtension"> <path value="DeviceRequest.modifierExtension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Extensions that cannot be ignored" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.identifier"> <path value="DeviceRequest.identifier" /> <short value="External Request identifier" /> <definition value="Identifiers assigned to this order by the orderer or by the receiver." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.identifier" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.identifier" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.2, ORC.3" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.identifier" /> </mapping> <mapping> <identity value="hcim-basicelements-v1.0-2017EN" /> <map value="NL-CM:0.0.6" /> <comment value="IdentificationNumber" /> </mapping> </element> <element id="DeviceRequest.instantiatesCanonical"> <path value="DeviceRequest.instantiatesCanonical" /> <short value="Instantiates FHIR protocol or definition" /> <definition value="The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this DeviceRequest." /> <comment value="Note: This is a business identifier, not a resource identifier (see [discussion](resource.html#identifiers)). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.instantiatesCanonical" /> <min value="0" /> <max value="*" /> </base> <type> <code value="canonical" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ActivityDefinition" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PlanDefinition" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.instantiatesCanonical" /> </mapping> <mapping> <identity value="v2" /> <map value="Varies by domain" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=DEFN].target" /> </mapping> </element> <element id="DeviceRequest.instantiatesUri"> <path value="DeviceRequest.instantiatesUri" /> <short value="Instantiates external protocol or definition" /> <definition value="The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this DeviceRequest." /> <comment value="This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.instantiatesUri" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.instantiatesUri" /> </mapping> <mapping> <identity value="v2" /> <map value="Varies by domain" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=DEFN].target" /> </mapping> </element> <element id="DeviceRequest.basedOn"> <path value="DeviceRequest.basedOn" /> <short value="What request fulfills" /> <definition value="Plan/proposal/order fulfilled by this request." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.basedOn" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.basedOn" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.8 (plus others)" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=FLFS].target" /> </mapping> <mapping> <identity value="quick" /> <map value="Proposal.prnReason.reason" /> </mapping> </element> <element id="DeviceRequest.priorRequest"> <path value="DeviceRequest.priorRequest" /> <short value="What request replaces" /> <definition value="The request takes the place of the referenced completed or terminated request(s)." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.priorRequest" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.replaces" /> </mapping> <mapping> <identity value="v2" /> <map value="Handled by message location of ORC (ORC.1=RO or RU)" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=RPLC].target" /> </mapping> </element> <element id="DeviceRequest.groupIdentifier"> <path value="DeviceRequest.groupIdentifier" /> <short value="Identifier of composite request" /> <definition value="Composite request this is part of." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.groupIdentifier" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.groupIdentifier" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.4" /> </mapping> <mapping> <identity value="rim" /> <map value=".inboundRelationship(typeCode=COMP].source[moodCode=INT].identifier" /> </mapping> </element> <element id="DeviceRequest.status"> <path value="DeviceRequest.status" /> <short value="draft | active | on-hold | revoked | completed | entered-in-error | unknown" /> <definition value="The status of the request." /> <comment value="This element is labeled as a modifier because the status contains the codes cancelled and entered-in-error that mark the request as not currently valid." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.status" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="DeviceRequestStatus" /> </extension> <strength value="required" /> <description value="Codes representing the status of the request." /> <valueSet value="http://hl7.org/fhir/ValueSet/request-status|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.status" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.status" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.5" /> </mapping> <mapping> <identity value="rim" /> <map value=".status" /> </mapping> <mapping> <identity value="quick" /> <map value="Action.currentStatus" /> </mapping> </element> <element id="DeviceRequest.status.id"> <path value="DeviceRequest.status.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.status.extension"> <path value="DeviceRequest.status.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.status.extension:orderStatus"> <path value="DeviceRequest.status.extension" /> <sliceName value="orderStatus" /> <short value="OrderStatus" /> <definition value="The status of the order." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <alias value="Bevat de specifieke code conform de zib, bij een FHIR-element die een verplichte koppeling heeft met een bepaalde FHIR waardelijst of een FHIR element die niet gecodeerd is gedefinieerd, terwijl de zib dit wel doet." /> <alias value="OrderStatus" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://nictiz.nl/fhir/StructureDefinition/code-specification" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v1.2.1-2015EN" /> <map value="NL-CM:16.1.9" /> <comment value="OrderStatus" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.0-2016EN" /> <map value="NL-CM:16.1.9" /> <comment value="OrderStatus" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.1-2017EN" /> <map value="NL-CM:16.1.9" /> <comment value="OrderStatus" /> </mapping> </element> <element id="DeviceRequest.status.extension:orderStatus.id"> <path value="DeviceRequest.status.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.status.extension:orderStatus.extension"> <path value="DeviceRequest.status.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.status.extension:orderStatus.url"> <path value="DeviceRequest.status.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="http://nictiz.nl/fhir/StructureDefinition/code-specification" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.status.extension:orderStatus.value[x]"> <path value="DeviceRequest.status.extension.value[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="base64Binary" /> </type> <type> <code value="boolean" /> </type> <type> <code value="canonical" /> </type> <type> <code value="code" /> </type> <type> <code value="date" /> </type> <type> <code value="dateTime" /> </type> <type> <code value="decimal" /> </type> <type> <code value="id" /> </type> <type> <code value="instant" /> </type> <type> <code value="integer" /> </type> <type> <code value="markdown" /> </type> <type> <code value="oid" /> </type> <type> <code value="positiveInt" /> </type> <type> <code value="string" /> </type> <type> <code value="time" /> </type> <type> <code value="unsignedInt" /> </type> <type> <code value="uri" /> </type> <type> <code value="url" /> </type> <type> <code value="uuid" /> </type> <type> <code value="Address" /> </type> <type> <code value="Age" /> </type> <type> <code value="Annotation" /> </type> <type> <code value="Attachment" /> </type> <type> <code value="CodeableConcept" /> </type> <type> <code value="Coding" /> </type> <type> <code value="ContactPoint" /> </type> <type> <code value="Count" /> </type> <type> <code value="Distance" /> </type> <type> <code value="Duration" /> </type> <type> <code value="HumanName" /> </type> <type> <code value="Identifier" /> </type> <type> <code value="Money" /> </type> <type> <code value="Period" /> </type> <type> <code value="Quantity" /> </type> <type> <code value="Range" /> </type> <type> <code value="Ratio" /> </type> <type> <code value="Reference" /> </type> <type> <code value="SampledData" /> </type> <type> <code value="Signature" /> </type> <type> <code value="Timing" /> </type> <type> <code value="ContactDetail" /> </type> <type> <code value="Contributor" /> </type> <type> <code value="DataRequirement" /> </type> <type> <code value="Expression" /> </type> <type> <code value="ParameterDefinition" /> </type> <type> <code value="RelatedArtifact" /> </type> <type> <code value="TriggerDefinition" /> </type> <type> <code value="UsageContext" /> </type> <type> <code value="Dosage" /> </type> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.status.extension:orderStatus.value[x]:valueCodeableConcept"> <path value="DeviceRequest.status.extension.value[x]" /> <sliceName value="valueCodeableConcept" /> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <strength value="extensible" /> <description value="The status of the order." /> <valueSetReference> <reference value="http://decor.nictiz.nl/fhir/ValueSet/2.16.840.1.113883.2.4.3.11.60.40.2.16.1.2--20171231000000" /> <display value="OrderStatusCodelist" /> </valueSetReference> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.status.value"> <path value="DeviceRequest.status.value" /> <representation value="xmlAttr" /> <short value="Primitive value for code" /> <definition value="Primitive value for code" /> <min value="0" /> <max value="1" /> <base> <path value="string.value" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="code" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/regex"> <valueString value="[^\s]+(\s[^\s]+)*" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <maxLength value="1048576" /> </element> <element id="DeviceRequest.intent"> <path value="DeviceRequest.intent" /> <short value="proposal | plan | directive | order | original-order | reflex-order | filler-order | instance-order | option" /> <definition value="Whether the request is a proposal, plan, an original order or a reflex order." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="1" /> <max value="1" /> <base> <path value="DeviceRequest.intent" /> <min value="1" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element changes the interpretation of all descriptive attributes. For example "the time the request is recommended to occur" vs. "the time the request is authorized to occur" or "who is recommended to perform the request" vs. "who is authorized to perform the request" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="RequestIntent" /> </extension> <strength value="required" /> <description value="The kind of diagnostic request." /> <valueSet value="http://hl7.org/fhir/ValueSet/request-intent|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.intent" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.class" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value=".moodCode (nuances beyond PRP/PLAN/RQO would need to be elsewhere)" /> </mapping> </element> <element id="DeviceRequest.priority"> <path value="DeviceRequest.priority" /> <short value="routine | urgent | asap | stat" /> <definition value="Indicates how quickly the {{title}} should be addressed with respect to other requests." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.priority" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If missing, normal priority" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="RequestPriority" /> </extension> <strength value="required" /> <description value="Identifies the level of importance to be assigned to actioning the request." /> <valueSet value="http://hl7.org/fhir/ValueSet/request-priority|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.priority" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.grade" /> </mapping> <mapping> <identity value="v2" /> <map value="TQ1.9" /> </mapping> <mapping> <identity value="rim" /> <map value=".priorityCode" /> </mapping> </element> <element id="DeviceRequest.code[x]"> <path value="DeviceRequest.code[x]" /> <short value="ProductType" /> <definition value="The code of the type of product." /> <alias value="ProductType" /> <min value="1" /> <max value="1" /> <base> <path value="DeviceRequest.code[x]" /> <min value="1" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://nictiz.nl/fhir/StructureDefinition/zib-MedicalDeviceProduct" /> </type> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="DeviceRequestCode" /> </extension> <strength value="extensible" /> <description value="ProductTypeCodelist" /> <valueSet value="http://hl7.org/fhir/ValueSet/device-kind" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.code" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.what[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="Varies by domain" /> </mapping> <mapping> <identity value="rim" /> <map value=".code" /> </mapping> <mapping> <identity value="quick" /> <map value="DeviceUse.device" /> </mapping> <mapping> <identity value="hcim-medicaldevice-v1.2-2015EN" /> <map value="NL-CM:10.1.3" /> <comment value="ProductType" /> </mapping> <mapping> <identity value="hcim-medicaldevice-v3.0-2016EN" /> <map value="NL-CM:10.1.3" /> <comment value="ProductType" /> </mapping> <mapping> <identity value="hcim-medicaldevice-v3.1-2017EN" /> <map value="NL-CM:10.1.3" /> <comment value="ProductType" /> </mapping> </element> <element id="DeviceRequest.parameter"> <path value="DeviceRequest.parameter" /> <short value="Device details" /> <definition value="Specific parameters for the ordered item. For example, the prism value for lenses." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.parameter" /> <min value="0" /> <max value="*" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.what[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="Varies by domain" /> </mapping> <mapping> <identity value="rim" /> <map value=".code" /> </mapping> <mapping> <identity value="quick" /> <map value="DeviceUse.device" /> </mapping> </element> <element id="DeviceRequest.parameter.id"> <path value="DeviceRequest.parameter.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.parameter.extension"> <path value="DeviceRequest.parameter.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.parameter.modifierExtension"> <path value="DeviceRequest.parameter.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.parameter.code"> <path value="DeviceRequest.parameter.code" /> <short value="Device detail" /> <definition value="A code or string that identifies the device detail being asserted." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.parameter.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ParameterCode" /> </extension> <strength value="example" /> <description value="A code that identifies the device detail." /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.what[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="Varies by domain" /> </mapping> <mapping> <identity value="rim" /> <map value=".code" /> </mapping> <mapping> <identity value="quick" /> <map value="DeviceUse.device" /> </mapping> </element> <element id="DeviceRequest.parameter.value[x]"> <path value="DeviceRequest.parameter.value[x]" /> <short value="Value of detail" /> <definition value="The value of the device detail." /> <comment value="Range means device should have a value that falls somewhere within the specified range." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.parameter.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <type> <code value="Quantity" /> </type> <type> <code value="Range" /> </type> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.what[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="Varies by domain" /> </mapping> <mapping> <identity value="rim" /> <map value=".code" /> </mapping> <mapping> <identity value="quick" /> <map value="DeviceUse.device" /> </mapping> </element> <element id="DeviceRequest.subject"> <path value="DeviceRequest.subject" /> <short value="Focus of request" /> <definition value="The patient who will use the device." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="1" /> <max value="1" /> <base> <path value="DeviceRequest.subject" /> <min value="1" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-patient" /> </type> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Group" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-location" /> </type> <type> <code value="Reference" /> <targetProfile value="http://nictiz.nl/fhir/StructureDefinition/zib-MedicalDeviceProduct" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.subject" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.subject[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="Accompanying PID segment" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=SBJ].role" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.subject" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.subject" /> </mapping> <mapping> <identity value="hcim-basicelements-v1.0-2017EN" /> <map value="NL-CM:0.0.11" /> <comment value="Subject" /> </mapping> </element> <element id="DeviceRequest.encounter"> <path value="DeviceRequest.encounter" /> <short value="Encounter motivating request" /> <definition value="An encounter that provides additional context in which this request is made." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.encounter" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Encounter" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.encounter" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.context" /> </mapping> <mapping> <identity value="v2" /> <map value="Accompanying PV1" /> </mapping> <mapping> <identity value="rim" /> <map value=".inboundRelationship(typeCode=COMP].source[classCode<=PCPR, moodCode=EVN]" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.encounter" /> </mapping> </element> <element id="DeviceRequest.occurrence[x]"> <path value="DeviceRequest.occurrence[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <short value="Desired time or schedule for use" /> <definition value="The timing schedule for the use of the device. The Schedule data type allows many different expressions, for example. "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013"." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.occurrence[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <type> <code value="Period" /> </type> <type> <code value="Timing" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.occurrence[x]" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.planned" /> </mapping> <mapping> <identity value="v2" /> <map value="Accompanying TQ1/TQ2 segments" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> <mapping> <identity value="quick" /> <map value="DeviceUse.applicationSchedule" /> </mapping> <mapping> <identity value="hcim-basicelements-v1.0-2017EN" /> <map value="NL-CM:0.0.14" /> <comment value="DateTime" /> </mapping> </element> <element id="DeviceRequest.occurrence[x]:occurrencePeriod"> <path value="DeviceRequest.occurrence[x]" /> <sliceName value="occurrencePeriod" /> <short value="Desired time or schedule for use" /> <definition value="The timing schedule for the use of the device. The Schedule data type allows many different expressions, for example. "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013"." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.occurrence[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.occurrence[x]" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.planned" /> </mapping> <mapping> <identity value="v2" /> <map value="Accompanying TQ1/TQ2 segments" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> <mapping> <identity value="quick" /> <map value="DeviceUse.applicationSchedule" /> </mapping> </element> <element id="DeviceRequest.occurrence[x]:occurrencePeriod.id"> <path value="DeviceRequest.occurrence[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.occurrence[x]:occurrencePeriod.extension"> <path value="DeviceRequest.occurrence[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.occurrence[x]:occurrencePeriod.start"> <path value="DeviceRequest.occurrence[x].start" /> <short value="StartDate" /> <definition value="Planned or requested date. Clinical reminders can be used to indicate from when the procedure can take place. A vague date (such as only the month and year) is permitted." /> <comment value="If the low element is missing, the meaning is that the low boundary is not known." /> <alias value="BeginDatum" /> <min value="0" /> <max value="1" /> <base> <path value="Period.start" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <condition value="per-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./low" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v1.2.1-2015EN" /> <map value="NL-CM:16.1.10" /> <comment value="StartDate" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.0-2016EN" /> <map value="NL-CM:16.1.10" /> <comment value="StartDate" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.1-2017EN" /> <map value="NL-CM:16.1.10" /> <comment value="StartDate" /> </mapping> </element> <element id="DeviceRequest.occurrence[x]:occurrencePeriod.end"> <path value="DeviceRequest.occurrence[x].end" /> <short value="EndDate" /> <definition value="The planned end date of the procedure can be included as well if needed. Depending on the type of procedure, this can also be used to indicate before which time it has to have been completed." /> <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." /> <alias value="EindDatum" /> <min value="0" /> <max value="1" /> <base> <path value="Period.end" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" /> <condition value="ele-1" /> <condition value="per-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR.2" /> </mapping> <mapping> <identity value="rim" /> <map value="./high" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v1.2.1-2015EN" /> <map value="NL-CM:16.1.11" /> <comment value="EndDate" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.0-2016EN" /> <map value="NL-CM:16.1.11" /> <comment value="EndDate" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.1-2017EN" /> <map value="NL-CM:16.1.11" /> <comment value="EndDate" /> </mapping> </element> <element id="DeviceRequest.occurrence[x]:occurrenceDateTime"> <path value="DeviceRequest.occurrence[x]" /> <sliceName value="occurrenceDateTime" /> <short value="Desired time or schedule for use" /> <definition value="The timing schedule for the use of the device. The Schedule data type allows many different expressions, for example. "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013"." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.occurrence[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.occurrence[x]" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.planned" /> </mapping> <mapping> <identity value="v2" /> <map value="Accompanying TQ1/TQ2 segments" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> <mapping> <identity value="quick" /> <map value="DeviceUse.applicationSchedule" /> </mapping> </element> <element id="DeviceRequest.occurrence[x]:occurrenceTiming"> <path value="DeviceRequest.occurrence[x]" /> <sliceName value="occurrenceTiming" /> <short value="Desired time or schedule for use" /> <definition value="The timing schedule for the use of the device. The Schedule data type allows many different expressions, for example. "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013"." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.occurrence[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Timing" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.occurrence[x]" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.planned" /> </mapping> <mapping> <identity value="v2" /> <map value="Accompanying TQ1/TQ2 segments" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> <mapping> <identity value="quick" /> <map value="DeviceUse.applicationSchedule" /> </mapping> </element> <element id="DeviceRequest.authoredOn"> <path value="DeviceRequest.authoredOn" /> <short value="When recorded" /> <definition value="When the request transitioned to being actionable." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.authoredOn" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.authoredOn" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.recorded" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.9" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=AUT].time" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.statementDateTime" /> </mapping> </element> <element id="DeviceRequest.requester"> <path value="DeviceRequest.requester" /> <short value="Who/what is requesting diagnostics" /> <definition value="The individual who initiated the request and has responsibility for its activation." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.requester" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.requester" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.author" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.12" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=AUT].role" /> </mapping> <mapping> <identity value="hcim-basicelements-v1.0-2017EN" /> <map value="NL-CM:0.0.7" /> <comment value="Author" /> </mapping> </element> <element id="DeviceRequest.requester.id"> <path value="DeviceRequest.requester.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.requester.extension"> <path value="DeviceRequest.requester.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.requester.reference"> <path value="DeviceRequest.requester.reference" /> <short value="Literal reference, Relative, internal or absolute URL" /> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources." /> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.requester.type"> <path value="DeviceRequest.requester.type" /> <short value="Type the reference refers to (e.g. "Patient")" /> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)." /> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt" /> </extension> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.requester.identifier"> <path value="DeviceRequest.requester.identifier" /> <short value="Logical reference, when literal reference is not known" /> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference." /> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="DeviceRequest.requester.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="DeviceRequest.requester.display" /> <short value="Text alternative for the resource" /> <definition value="Plain text narrative that identifies the resource in addition to the resource reference." /> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.requester.agent"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="DeviceRequest.requester.agent" /> <short value="A reference from one resource to another" /> <definition value="A reference from one resource to another." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.requester.agent" /> </base> <type> <code value="Reference" /> <targetProfile value="http://nictiz.nl/fhir/StructureDefinition/zib-MedicalDeviceProduct" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-practitioner" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> </element> <element id="DeviceRequest.requester.agent.id"> <path value="DeviceRequest.requester.agent.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.requester.agent.extension"> <path value="DeviceRequest.requester.agent.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.requester.agent.extension:practitionerRole"> <path value="DeviceRequest.requester.agent.extension" /> <sliceName value="practitionerRole" /> <short value="Optional Extensions Element" /> <definition value="Optional Extension Element - found in all resources." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://nictiz.nl/fhir/StructureDefinition/practitionerrole-reference" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.requester.agent.reference"> <path value="DeviceRequest.requester.agent.reference" /> <short value="Literal reference, Relative, internal or absolute URL" /> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources." /> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.requester.agent.type"> <path value="DeviceRequest.requester.agent.type" /> <short value="Type the reference refers to (e.g. "Patient")" /> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)." /> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt" /> </extension> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.requester.agent.identifier"> <path value="DeviceRequest.requester.agent.identifier" /> <short value="Logical reference, when literal reference is not known" /> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference." /> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="DeviceRequest.requester.agent.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="DeviceRequest.requester.agent.display" /> <short value="Text alternative for the resource" /> <definition value="Plain text narrative that identifies the resource in addition to the resource reference." /> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.requester.onBehalfOf"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="DeviceRequest.requester.onBehalfOf" /> <short value="A reference from one resource to another" /> <definition value="A reference from one resource to another." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.requester.onBehalfOf" /> </base> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> </element> <element id="DeviceRequest.performerType"> <path value="DeviceRequest.performerType" /> <short value="Filler role" /> <definition value="Desired type of performer for doing the diagnostic testing." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.performerType" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="DeviceRequestParticipantRole" /> </extension> <strength value="example" /> <description value="Indicates specific responsibility of an individual within the care team, such as "Primary physician", "Team coordinator", "Caregiver", etc." /> <valueSet value="http://hl7.org/fhir/ValueSet/participant-role" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.performerType" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.actor" /> </mapping> <mapping> <identity value="v2" /> <map value="PRT" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=PRF].role[scoper.determinerCode=KIND].code" /> </mapping> </element> <element id="DeviceRequest.performerType.id"> <path value="DeviceRequest.performerType.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.performerType.extension"> <path value="DeviceRequest.performerType.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.performerType.coding"> <path value="DeviceRequest.performerType.coding" /> <slicing> <discriminator> <type value="value" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <short value="Code defined by a terminology system" /> <definition value="A reference to a code defined by a terminology system." /> <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="*" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="DeviceRequest.performerType.coding:healthProfessionalRole"> <path value="DeviceRequest.performerType.coding" /> <sliceName value="healthProfessionalRole" /> <short value="HealthProfessionalRole" /> <definition value="The role the healthcare provider fulfils in the healthcare process. For healthcare providers, this could be for example main practitioner, referrer or general practitioner." /> <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <alias value="ZorgverlenerRol" /> <min value="0" /> <max value="*" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <strength value="required" /> <valueSetReference> <reference value="http://decor.nictiz.nl/fhir/ValueSet/2.16.840.1.113883.2.4.3.11.60.40.2.17.1.5--20171231000000" /> <display value="ZorgverlenerRolCodelijst" /> </valueSetReference> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> <mapping> <identity value="hcim-healthprofessional-v1.2.1-2015EN" /> <map value="NL-CM:17.1.5" /> <comment value="HealthcareProviderRole" /> </mapping> <mapping> <identity value="hcim-healthprofessional-v3.0-2016EN" /> <map value="NL-CM:17.1.5" /> <comment value="HealthcareProviderRole" /> </mapping> <mapping> <identity value="hcim-healthprofessional-v3.2-2017EN" /> <map value="NL-CM:17.1.5" /> <comment value="HealthProfessionalRole" /> </mapping> </element> <element id="DeviceRequest.performerType.text"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="DeviceRequest.performerType.text" /> <short value="Plain text representation of the concept" /> <definition value="A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user." /> <comment value="Very often the text is the same as a displayName of one of the codings." /> <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.9. But note many systems use C*E.2 for this" /> </mapping> <mapping> <identity value="rim" /> <map value="./originalText[mediaType/code="text/plain"]/data" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" /> </mapping> </element> <element id="DeviceRequest.performer"> <path value="DeviceRequest.performer" /> <short value="Requested Filler" /> <definition value="The desired performer for doing the diagnostic testing." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="1" /> <base> <path value="DeviceRequest.performer" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-practitioner" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-organization" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-patient" /> </type> <type> <code value="Reference" /> <targetProfile value="http://nictiz.nl/fhir/StructureDefinition/zib-MedicalDeviceProduct" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-relatedperson" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-healthcareservice" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.performer" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.actor" /> </mapping> <mapping> <identity value="v2" /> <map value="PRT" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=PRF].role[scoper.determinerCode=INSTANCE]" /> </mapping> </element> <element id="DeviceRequest.performer.id"> <path value="DeviceRequest.performer.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.performer.extension"> <path value="DeviceRequest.performer.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.performer.extension:practitionerRole"> <path value="DeviceRequest.performer.extension" /> <sliceName value="practitionerRole" /> <short value="Optional Extensions Element" /> <definition value="Optional Extension Element - found in all resources." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://nictiz.nl/fhir/StructureDefinition/practitionerrole-reference" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.performer.reference"> <path value="DeviceRequest.performer.reference" /> <short value="Literal reference, Relative, internal or absolute URL" /> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources." /> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.performer.type"> <path value="DeviceRequest.performer.type" /> <short value="Type the reference refers to (e.g. "Patient")" /> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)." /> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt" /> </extension> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.performer.identifier"> <path value="DeviceRequest.performer.identifier" /> <short value="Logical reference, when literal reference is not known" /> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference." /> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="DeviceRequest.performer.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="DeviceRequest.performer.display" /> <short value="Text alternative for the resource" /> <definition value="Plain text narrative that identifies the resource in addition to the resource reference." /> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.reasonCode"> <path value="DeviceRequest.reasonCode" /> <short value="Coded Reason for request" /> <definition value="Reason or justification for the use of this device." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.reasonCode" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="DeviceRequestReason" /> </extension> <strength value="example" /> <description value="Diagnosis or problem codes justifying the reason for requesting the device." /> <valueSet value="http://hl7.org/fhir/ValueSet/condition-code" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.reasonCode" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.why[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.16" /> </mapping> <mapping> <identity value="rim" /> <map value=".reasonCode" /> </mapping> <mapping> <identity value="quick" /> <map value="Action.indication.reason" /> </mapping> </element> <element id="DeviceRequest.reasonReference"> <path value="DeviceRequest.reasonReference" /> <short value="Linked Reason for request" /> <definition value="Reason or justification for the use of this device." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.reasonReference" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Condition" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Observation" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/DiagnosticReport" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/DocumentReference" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.reasonReference" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.why[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.16" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=RSON].target" /> </mapping> </element> <element id="DeviceRequest.insurance"> <path value="DeviceRequest.insurance" /> <short value="Associated insurance coverage" /> <definition value="Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be required for delivering the requested service." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.insurance" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Coverage" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ClaimResponse" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.insurance" /> </mapping> <mapping> <identity value="v2" /> <map value="IN1/IN2" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=COVBY].target" /> </mapping> </element> <element id="DeviceRequest.supportingInfo"> <path value="DeviceRequest.supportingInfo" /> <short value="Additional clinical information" /> <definition value="Additional clinical information about the patient that may influence the request fulfilment. For example, this may include where on the subject's body the device will be used (i.e. the target site)." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <requirements value="Knowing where the device is targeted is important for tracking if multiple sites are possible." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.supportingInfo" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.supportingInfo" /> </mapping> <mapping> <identity value="v2" /> <map value="Accompanying segments" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=PERT].target" /> </mapping> </element> <element id="DeviceRequest.note"> <path value="DeviceRequest.note" /> <short value="Notes or comments" /> <definition value="Details about this request that were not represented at all or sufficiently in one of the attributes provided in a class. These may include for example a comment, an instruction, or a note associated with the statement." /> <comment value="For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. *Annotations SHOULD NOT* be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible)." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.note" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Annotation" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.note" /> </mapping> <mapping> <identity value="v2" /> <map value="NTE" /> </mapping> <mapping> <identity value="rim" /> <map value=".inboundRelationship(typeCode=SUBJ].source[classCode=ANNGEN, moodCode=EVN].value[xsi:type=ST]" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.additionalText" /> </mapping> </element> <element id="DeviceRequest.note.id"> <path value="DeviceRequest.note.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.note.extension"> <path value="DeviceRequest.note.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.note.author[x]"> <path value="DeviceRequest.note.author[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <short value="Individual responsible for the annotation" /> <definition value="The individual responsible for making the annotation." /> <comment value="Organization is used when there's no need for specific attribution as to who made the comment." /> <min value="0" /> <max value="1" /> <base> <path value="Annotation.author[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-practitioner" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-patient" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-relatedperson" /> </type> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.participant[typeCode=AUT].role" /> </mapping> </element> <element id="DeviceRequest.note.author[x]:authorReference"> <path value="DeviceRequest.note.author[x]" /> <sliceName value="authorReference" /> <short value="Individual responsible for the annotation" /> <definition value="The individual responsible for making the annotation." /> <comment value="Organization is used when there's no need for specific attribution as to who made the comment." /> <min value="0" /> <max value="1" /> <base> <path value="Annotation.author[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> </type> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> </type> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.participant[typeCode=AUT].role" /> </mapping> </element> <element id="DeviceRequest.note.author[x]:authorReference.id"> <path value="DeviceRequest.note.author[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="DeviceRequest.note.author[x]:authorReference.extension"> <path value="DeviceRequest.note.author[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.note.author[x]:authorReference.extension:practitionerRole"> <path value="DeviceRequest.note.author[x].extension" /> <sliceName value="practitionerRole" /> <short value="Optional Extensions Element" /> <definition value="Optional Extension Element - found in all resources." /> <comment value="Relevant only in combination with Reference(Practitioner)" /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://nictiz.nl/fhir/StructureDefinition/practitionerrole-reference" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.note.author[x]:authorReference.reference"> <path value="DeviceRequest.note.author[x].reference" /> <short value="Literal reference, Relative, internal or absolute URL" /> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources." /> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.note.author[x]:authorReference.type"> <path value="DeviceRequest.note.author[x].type" /> <short value="Type the reference refers to (e.g. "Patient")" /> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)." /> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt" /> </extension> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.note.author[x]:authorReference.identifier"> <path value="DeviceRequest.note.author[x].identifier" /> <short value="Logical reference, when literal reference is not known" /> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference." /> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="DeviceRequest.note.author[x]:authorReference.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="DeviceRequest.note.author[x].display" /> <short value="Text alternative for the resource" /> <definition value="Plain text narrative that identifies the resource in addition to the resource reference." /> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="DeviceRequest.note.author[x]:authorString"> <path value="DeviceRequest.note.author[x]" /> <sliceName value="authorString" /> <short value="Individual responsible for the annotation" /> <definition value="The individual responsible for making the annotation." /> <comment value="Organization is used when there's no need for specific attribution as to who made the comment." /> <min value="0" /> <max value="1" /> <base> <path value="Annotation.author[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.participant[typeCode=AUT].role" /> </mapping> </element> <element id="DeviceRequest.note.time"> <path value="DeviceRequest.note.time" /> <short value="When the annotation was made" /> <definition value="Indicates when this particular annotation was made." /> <min value="0" /> <max value="1" /> <base> <path value="Annotation.time" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.effectiveTime" /> </mapping> </element> <element id="DeviceRequest.note.text"> <path value="DeviceRequest.note.text" /> <short value="The annotation - text content (as markdown)" /> <definition value="The text of the annotation in markdown format." /> <comment value="Systems are not required to have markdown support, so the text should be readable without markdown processing. The markdown syntax is GFM - see https://github.github.com/gfm/" /> <min value="1" /> <max value="1" /> <base> <path value="Annotation.text" /> <min value="1" /> <max value="1" /> </base> <type> <code value="markdown" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.text" /> </mapping> </element> <element id="DeviceRequest.relevantHistory"> <path value="DeviceRequest.relevantHistory" /> <short value="Request provenance" /> <definition value="Key events in the history of the request." /> <comment value="This might not include provenances for all versions of the request - only those deemed "relevant" or important. This SHALL NOT include the Provenance associated with this current version of the resource. (If that provenance is deemed to be a "relevant" change, it will need to be added as part of a later update. Until then, it can be queried directly as the Provenance that points to this version using _revinclude All Provenances should have some historical version of this Request as their subject." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.relevantHistory" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Provenance" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.relevantHistory" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value=".inboundRelationship(typeCode=SUBJ].source[classCode=CACT, moodCode=EVN]" /> </mapping> </element> <element id="DeviceRequest.context"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="DeviceRequest.context" /> <short value="A reference from one resource to another" /> <definition value="A reference from one resource to another." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="*" /> <base> <path value="DeviceRequest.context" /> </base> <type> <code value="Reference" /> <targetProfile value="http://nictiz.nl/fhir/StructureDefinition/zib-Encounter" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-episodeofcare" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> </element> </snapshot> <differential> <element id="DeviceRequest"> <path value="DeviceRequest" /> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v1.2.1-2015EN" /> <map value="NL-CM:16.1.7" /> <comment value="MedicalAid" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.0-2016EN" /> <map value="NL-CM:16.1.7" /> <comment value="MedicalAid" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.1-2017EN" /> <map value="NL-CM:16.1.7" /> <comment value="MedicalDevice" /> </mapping> </element> <element id="DeviceRequest.identifier"> <path value="DeviceRequest.identifier" /> <mapping> <identity value="hcim-basicelements-v1.0-2017EN" /> <map value="NL-CM:0.0.6" /> <comment value="IdentificationNumber" /> </mapping> </element> <element id="DeviceRequest.status.extension"> <path value="DeviceRequest.status.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <rules value="open" /> </slicing> </element> <element id="DeviceRequest.status.extension:orderStatus"> <path value="DeviceRequest.status.extension" /> <sliceName value="orderStatus" /> <short value="OrderStatus" /> <definition value="The status of the order." /> <alias value="OrderStatus" /> <max value="1" /> <type> <code value="Extension" /> <profile value="http://nictiz.nl/fhir/StructureDefinition/code-specification" /> </type> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v1.2.1-2015EN" /> <map value="NL-CM:16.1.9" /> <comment value="OrderStatus" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.0-2016EN" /> <map value="NL-CM:16.1.9" /> <comment value="OrderStatus" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.1-2017EN" /> <map value="NL-CM:16.1.9" /> <comment value="OrderStatus" /> </mapping> </element> <element id="DeviceRequest.status.extension:orderStatus.valueCodeableConcept:valueCodeableConcept"> <path value="DeviceRequest.status.extension.valueCodeableConcept" /> <sliceName value="valueCodeableConcept" /> <binding> <strength value="extensible" /> <description value="The status of the order." /> <valueSetReference> <reference value="http://decor.nictiz.nl/fhir/ValueSet/2.16.840.1.113883.2.4.3.11.60.40.2.16.1.2--20171231000000" /> <display value="OrderStatusCodelist" /> </valueSetReference> </binding> </element> <element id="DeviceRequest.code[x]"> <path value="DeviceRequest.code[x]" /> <short value="ProductType" /> <definition value="The code of the type of product." /> <alias value="ProductType" /> <type> <code value="Reference" /> <targetProfile value="http://nictiz.nl/fhir/StructureDefinition/zib-MedicalDeviceProduct" /> </type> <type> <code value="CodeableConcept" /> </type> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="DeviceRequestCode" /> </extension> <strength value="extensible" /> <description value="ProductTypeCodelist" /> <valueSetReference> <reference value="http://decor.nictiz.nl/fhir/ValueSet/2.16.840.1.113883.2.4.3.11.60.40.2.10.1.1--20171231000000" /> <display value="ProductTypeCodelijst" /> </valueSetReference> </binding> <mapping> <identity value="hcim-medicaldevice-v1.2-2015EN" /> <map value="NL-CM:10.1.3" /> <comment value="ProductType" /> </mapping> <mapping> <identity value="hcim-medicaldevice-v3.0-2016EN" /> <map value="NL-CM:10.1.3" /> <comment value="ProductType" /> </mapping> <mapping> <identity value="hcim-medicaldevice-v3.1-2017EN" /> <map value="NL-CM:10.1.3" /> <comment value="ProductType" /> </mapping> </element> <element id="DeviceRequest.subject"> <path value="DeviceRequest.subject" /> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-patient" /> </type> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Group" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-location" /> </type> <type> <code value="Reference" /> <targetProfile value="http://nictiz.nl/fhir/StructureDefinition/zib-MedicalDeviceProduct" /> </type> <mapping> <identity value="hcim-basicelements-v1.0-2017EN" /> <map value="NL-CM:0.0.11" /> <comment value="Subject" /> </mapping> </element> <element id="DeviceRequest.context"> <path value="DeviceRequest.context" /> <type> <code value="Reference" /> <targetProfile value="http://nictiz.nl/fhir/StructureDefinition/zib-Encounter" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-episodeofcare" /> </type> </element> <element id="DeviceRequest.occurrence[x]"> <path value="DeviceRequest.occurrence[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <mapping> <identity value="hcim-basicelements-v1.0-2017EN" /> <map value="NL-CM:0.0.14" /> <comment value="DateTime" /> </mapping> </element> <element id="DeviceRequest.occurrence[x]:occurrencePeriod"> <path value="DeviceRequest.occurrence[x]" /> <sliceName value="occurrencePeriod" /> <type> <code value="Period" /> </type> </element> <element id="DeviceRequest.occurrence[x]:occurrencePeriod.start"> <path value="DeviceRequest.occurrence[x].start" /> <short value="StartDate" /> <definition value="Planned or requested date. Clinical reminders can be used to indicate from when the procedure can take place. A vague date (such as only the month and year) is permitted." /> <alias value="BeginDatum" /> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v1.2.1-2015EN" /> <map value="NL-CM:16.1.10" /> <comment value="StartDate" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.0-2016EN" /> <map value="NL-CM:16.1.10" /> <comment value="StartDate" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.1-2017EN" /> <map value="NL-CM:16.1.10" /> <comment value="StartDate" /> </mapping> </element> <element id="DeviceRequest.occurrence[x]:occurrencePeriod.end"> <path value="DeviceRequest.occurrence[x].end" /> <short value="EndDate" /> <definition value="The planned end date of the procedure can be included as well if needed. Depending on the type of procedure, this can also be used to indicate before which time it has to have been completed." /> <alias value="EindDatum" /> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v1.2.1-2015EN" /> <map value="NL-CM:16.1.11" /> <comment value="EndDate" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.0-2016EN" /> <map value="NL-CM:16.1.11" /> <comment value="EndDate" /> </mapping> <mapping> <identity value="hcim-plannedcareactivityfortransfer-v3.1-2017EN" /> <map value="NL-CM:16.1.11" /> <comment value="EndDate" /> </mapping> </element> <element id="DeviceRequest.occurrence[x]:occurrenceDateTime"> <path value="DeviceRequest.occurrence[x]" /> <sliceName value="occurrenceDateTime" /> <type> <code value="dateTime" /> </type> </element> <element id="DeviceRequest.occurrence[x]:occurrenceTiming"> <path value="DeviceRequest.occurrence[x]" /> <sliceName value="occurrenceTiming" /> <type> <code value="Timing" /> </type> </element> <element id="DeviceRequest.requester"> <path value="DeviceRequest.requester" /> <mapping> <identity value="hcim-basicelements-v1.0-2017EN" /> <map value="NL-CM:0.0.7" /> <comment value="Author" /> </mapping> </element> <element id="DeviceRequest.requester.agent"> <path value="DeviceRequest.requester.agent" /> <type> <code value="Reference" /> <targetProfile value="http://nictiz.nl/fhir/StructureDefinition/zib-MedicalDeviceProduct" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-practitioner" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-organization" /> </type> </element> <element id="DeviceRequest.requester.agent.extension"> <path value="DeviceRequest.requester.agent.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <rules value="open" /> </slicing> </element> <element id="DeviceRequest.requester.agent.extension:practitionerRole"> <path value="DeviceRequest.requester.agent.extension" /> <sliceName value="practitionerRole" /> <max value="1" /> <type> <code value="Extension" /> <profile value="http://nictiz.nl/fhir/StructureDefinition/practitionerrole-reference" /> </type> </element> <element id="DeviceRequest.requester.onBehalfOf"> <path value="DeviceRequest.requester.onBehalfOf" /> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-organization" /> </type> </element> <element id="DeviceRequest.performerType.coding"> <path value="DeviceRequest.performerType.coding" /> <slicing> <discriminator> <type value="value" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> </element> <element id="DeviceRequest.performerType.coding:healthProfessionalRole"> <path value="DeviceRequest.performerType.coding" /> <sliceName value="healthProfessionalRole" /> <short value="HealthProfessionalRole" /> <definition value="The role the healthcare provider fulfils in the healthcare process. For healthcare providers, this could be for example main practitioner, referrer or general practitioner." /> <alias value="ZorgverlenerRol" /> <binding> <strength value="required" /> <valueSetReference> <reference value="http://decor.nictiz.nl/fhir/ValueSet/2.16.840.1.113883.2.4.3.11.60.40.2.17.1.5--20171231000000" /> <display value="ZorgverlenerRolCodelijst" /> </valueSetReference> </binding> <mapping> <identity value="hcim-healthprofessional-v1.2.1-2015EN" /> <map value="NL-CM:17.1.5" /> <comment value="HealthcareProviderRole" /> </mapping> <mapping> <identity value="hcim-healthprofessional-v3.0-2016EN" /> <map value="NL-CM:17.1.5" /> <comment value="HealthcareProviderRole" /> </mapping> <mapping> <identity value="hcim-healthprofessional-v3.2-2017EN" /> <map value="NL-CM:17.1.5" /> <comment value="HealthProfessionalRole" /> </mapping> </element> <element id="DeviceRequest.performer"> <path value="DeviceRequest.performer" /> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-practitioner" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-organization" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-patient" /> </type> <type> <code value="Reference" /> <targetProfile value="http://nictiz.nl/fhir/StructureDefinition/zib-MedicalDeviceProduct" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-relatedperson" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-healthcareservice" /> </type> </element> <element id="DeviceRequest.performer.extension"> <path value="DeviceRequest.performer.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <rules value="open" /> </slicing> </element> <element id="DeviceRequest.performer.extension:practitionerRole"> <path value="DeviceRequest.performer.extension" /> <sliceName value="practitionerRole" /> <max value="1" /> <type> <code value="Extension" /> <profile value="http://nictiz.nl/fhir/StructureDefinition/practitionerrole-reference" /> </type> </element> <element id="DeviceRequest.note.author[x]"> <path value="DeviceRequest.note.author[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-practitioner" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-patient" /> </type> <type> <code value="Reference" /> <targetProfile value="http://fhir.nl/fhir/StructureDefinition/nl-core-relatedperson" /> </type> <type> <code value="string" /> </type> </element> <element id="DeviceRequest.note.author[x]:authorReference"> <path value="DeviceRequest.note.author[x]" /> <sliceName value="authorReference" /> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> </type> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> </type> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" /> </type> </element> <element id="DeviceRequest.note.author[x]:authorReference.extension"> <path value="DeviceRequest.note.author[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <rules value="open" /> </slicing> </element> <element id="DeviceRequest.note.author[x]:authorReference.extension:practitionerRole"> <path value="DeviceRequest.note.author[x].extension" /> <sliceName value="practitionerRole" /> <comment value="Relevant only in combination with Reference(Practitioner)" /> <min value="0" /> <max value="1" /> <type> <code value="Extension" /> <profile value="http://nictiz.nl/fhir/StructureDefinition/practitionerrole-reference" /> </type> </element> <element id="DeviceRequest.note.author[x]:authorString"> <path value="DeviceRequest.note.author[x]" /> <sliceName value="authorString" /> <type> <code value="string" /> </type> </element> </differential> </StructureDefinition>