<status value="draft" /> <publisher value="Healthdata.be (Sciensano)" /> <contact> <name value="Service portal – healthdata.be" /> <telecom> <system value="url" /> <value value="https://sciensano.service-now.com/sp" /> <use value="work" /> </telecom> </contact> <description value="Address information includes data where a person resides (temporarily, permanently) or where a building is located." /> <copyright value="Copyright and related rights waived via CC0, https://creativecommons.org/publicdomain/zero/1.0/. This does not apply to information from third parties, for example a medical terminology system. The implementer alone is responsible for identifying and obtaining any necessary licenses or authorizations to utilize third party IP in connection with the specification or otherwise." /> <fhirVersion value="4.0.1" /> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <uri value="https://zibs.nl/wiki/AddressInformation-v1.1(2020EN)" /> <name value="zib AddressInformation-v1.1(2020EN)" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <uri value="https://fhir.healthdata.be/StructureDefinition/LogicalModel/HdBe-AddressInformation" /> <name value="HdBe logical model AddressInformation" /> </mapping> <kind value="complex-type" /> <abstract value="false" /> <type value="Address" /> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Address" /> <derivation value="constraint" /> <snapshot> <element id="Address"> <path value="Address" /> <short value="AddressInformation" /> <definition value="This datatype defines a common basis for expressing all addresses around the world, but adds extensions to express Belgium addresses specifically, according to the CBB AddressInformation. A Belgian Address still is a proper FHIR Address, which means that systems that cannot interpret the extensions will still be able to render and work with this datatype. To have true compatibility an implementer SHOULD use the core Address parts as intended. To have addresses work for Belgium context, the implementer SHOULD in addition use the extension element. **Separate address parts** The first addition is that Belgium addresses make certain address parts separately communicable. These parts are required for use in true Belgian systems when dealing with Belgian addresses, but may not have value for international systems when information gets sent abroad." /> <comment value="Note: address is for postal addresses, not physical locations." /> <alias value="Adresgegevens" /> <min value="0" /> <max value="*" /> <base> <path value="Address" /> <min value="0" /> <max value="*" /> </base> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XAD" /> </mapping> <mapping> <identity value="rim" /> <map value="AD" /> </mapping> <mapping> <identity value="servd" /> <map value="Address" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.1" /> <comment value="AddressInformation" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation" /> </mapping> </element> <element id="Address.id"> <path value="Address.id" /> <representation value="xmlAttr" /> <short value="xml:id (or equivalent in JSON)" /> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Address.extension"> <path value="Address.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional Content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="1" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.extension:language"> <path value="Address.extension" /> <sliceName value="language" /> <short value="Human Language for the item" /> <definition value="The Human Language of the item." /> <comment value="This is used where an item may repeat to indicate the language of each repeat." /> <alias value="extensions" /> <alias value="user content" /> <min value="1" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/StructureDefinition/language" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="false" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.use"> <path value="Address.use" /> <short value="AddressType" /> <definition value="The type of address in question, such as a home address or mailing address." /> <comment value="This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one. Applications can assume that an address is current unless it explicitly says that it is temporary or old." /> <requirements value="Allows an appropriate address to be chosen from a list of many." /> <alias value="AdresSoort" /> <min value="0" /> <max value="1" /> <base> <path value="Address.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <example> <label value="General" /> <valueCode value="home" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="AddressUse" /> </extension> <strength value="required" /> <description value="The use of an address" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XAD.7" /> </mapping> <mapping> <identity value="rim" /> <map value="unique(./use)" /> </mapping> <mapping> <identity value="servd" /> <map value="./AddressPurpose" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.8" /> <comment value="AddressType" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.AddressUse" /> </mapping> </element> <element id="Address.type"> <path value="Address.type" /> <short value="AddressType" /> <definition value="The type of address in question, such as a home address or mailing address." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <alias value="AdresSoort" /> <min value="0" /> <max value="1" /> <base> <path value="Address.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <example> <label value="General" /> <valueCode value="both" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="AddressType" /> </extension> <strength value="required" /> <description value="The type of an address (physical / postal)" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XAD.18" /> </mapping> <mapping> <identity value="rim" /> <map value="unique(./use)" /> </mapping> <mapping> <identity value="vcard" /> <map value="address type parameter" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.8" /> <comment value="AddressType" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.AddressType" /> </mapping> </element> <element id="Address.text"> <path value="Address.text" /> <short value="Text representation of the address" /> <definition value="A full text representation of the address." /> <comment value="Can provide both a text representation and parts." /> <requirements value="A renderable, unencoded form." /> <min value="0" /> <max value="1" /> <base> <path value="Address.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="137 Nowhere Street, Erewhon 9132" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XAD.1 + XAD.2 + XAD.3 + XAD.4 + XAD.5 + XAD.6" /> </mapping> <mapping> <identity value="rim" /> <map value="./formatted" /> </mapping> <mapping> <identity value="vcard" /> <map value="address label parameter" /> </mapping> </element> <element id="Address.line"> <path value="Address.line" /> <short value="Street name, number, direction & P.O. Box etc." /> <definition value="This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information." /> <comment value="The elements of Address stored in the address-part extensions will be ignored by applications that do not support them, so any information in them should also be duplicated in the `Address.line` to which they are attached. The value of `Address.line` should be populated with a complete string representation of all the separate extension values, like: "[Street] [HouseNumberIndication] [HouseNumber] [HouseNumberLetter] [HouseNumberAddition]"." /> <requirements value="home | work | temp | old - purpose of this address." /> <min value="0" /> <max value="*" /> <base> <path value="Address.line" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <orderMeaning value="The order in which lines should appear in an address label" /> <example> <label value="General" /> <valueString value="137 Nowhere Street" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XAD.1 + XAD.2 (note: XAD.1 and XAD.2 have different meanings for a company address than for a person address)" /> </mapping> <mapping> <identity value="rim" /> <map value="AD.part[parttype = AL]" /> </mapping> <mapping> <identity value="vcard" /> <map value="street" /> </mapping> <mapping> <identity value="servd" /> <map value="./StreetAddress (newline delimitted)" /> </mapping> </element> <element id="Address.line.id"> <path value="Address.line.id" /> <representation value="xmlAttr" /> <short value="xml:id (or equivalent in JSON)" /> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Address.line.extension"> <path value="Address.line.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional Content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:streetName"> <path value="Address.line.extension" /> <sliceName value="streetName" /> <short value="streetName" /> <definition value="streetName." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetName" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="ADXP[partType=STR]" /> </mapping> </element> <element id="Address.line.extension:streetName.id"> <path value="Address.line.extension.id" /> <representation value="xmlAttr" /> <short value="xml:id (or equivalent in JSON)" /> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Address.line.extension:streetName.extension"> <path value="Address.line.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional Content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:streetName.url"> <path value="Address.line.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <fixedUri value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetName" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:streetName.value[x]"> <path value="Address.line.extension.value[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <short value="Street" /> <definition value="Street name of the address." /> <alias value="Straat" /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="base64Binary" /> </type> <type> <code value="boolean" /> </type> <type> <code value="code" /> </type> <type> <code value="date" /> </type> <type> <code value="dateTime" /> </type> <type> <code value="decimal" /> </type> <type> <code value="id" /> </type> <type> <code value="instant" /> </type> <type> <code value="integer" /> </type> <type> <code value="markdown" /> </type> <type> <code value="oid" /> </type> <type> <code value="positiveInt" /> </type> <type> <code value="string" /> </type> <type> <code value="time" /> </type> <type> <code value="unsignedInt" /> </type> <type> <code value="uri" /> </type> <type> <code value="Address" /> </type> <type> <code value="Age" /> </type> <type> <code value="Annotation" /> </type> <type> <code value="Attachment" /> </type> <type> <code value="CodeableConcept" /> </type> <type> <code value="Coding" /> </type> <type> <code value="ContactPoint" /> </type> <type> <code value="Count" /> </type> <type> <code value="Distance" /> </type> <type> <code value="Duration" /> </type> <type> <code value="HumanName" /> </type> <type> <code value="Identifier" /> </type> <type> <code value="Money" /> </type> <type> <code value="Period" /> </type> <type> <code value="Quantity" /> </type> <type> <code value="Range" /> </type> <type> <code value="Ratio" /> </type> <type> <code value="Reference" /> </type> <type> <code value="SampledData" /> </type> <type> <code value="Signature" /> </type> <type> <code value="Timing" /> </type> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.2" /> <comment value="Street" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.Street" /> </mapping> </element> <element id="Address.line.extension:streetName.value[x]:valueString"> <path value="Address.line.extension.value[x]" /> <sliceName value="valueString" /> <short value="Value of extension" /> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)." /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:houseNumber"> <path value="Address.line.extension" /> <sliceName value="houseNumber" /> <short value="houseNumber" /> <definition value="The number of a building, house or lot alongside the street. Also known as "primary street number". This does not number the street but rather the building." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-houseNumber" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="ADXP[partType=BNR]" /> </mapping> </element> <element id="Address.line.extension:houseNumber.id"> <path value="Address.line.extension.id" /> <representation value="xmlAttr" /> <short value="xml:id (or equivalent in JSON)" /> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Address.line.extension:houseNumber.extension"> <path value="Address.line.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional Content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:houseNumber.url"> <path value="Address.line.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <fixedUri value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-houseNumber" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:houseNumber.value[x]"> <path value="Address.line.extension.value[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <short value="HouseNumber" /> <definition value="House number of the address." /> <alias value="Huisnummer" /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="base64Binary" /> </type> <type> <code value="boolean" /> </type> <type> <code value="code" /> </type> <type> <code value="date" /> </type> <type> <code value="dateTime" /> </type> <type> <code value="decimal" /> </type> <type> <code value="id" /> </type> <type> <code value="instant" /> </type> <type> <code value="integer" /> </type> <type> <code value="markdown" /> </type> <type> <code value="oid" /> </type> <type> <code value="positiveInt" /> </type> <type> <code value="string" /> </type> <type> <code value="time" /> </type> <type> <code value="unsignedInt" /> </type> <type> <code value="uri" /> </type> <type> <code value="Address" /> </type> <type> <code value="Age" /> </type> <type> <code value="Annotation" /> </type> <type> <code value="Attachment" /> </type> <type> <code value="CodeableConcept" /> </type> <type> <code value="Coding" /> </type> <type> <code value="ContactPoint" /> </type> <type> <code value="Count" /> </type> <type> <code value="Distance" /> </type> <type> <code value="Duration" /> </type> <type> <code value="HumanName" /> </type> <type> <code value="Identifier" /> </type> <type> <code value="Money" /> </type> <type> <code value="Period" /> </type> <type> <code value="Quantity" /> </type> <type> <code value="Range" /> </type> <type> <code value="Ratio" /> </type> <type> <code value="Reference" /> </type> <type> <code value="SampledData" /> </type> <type> <code value="Signature" /> </type> <type> <code value="Timing" /> </type> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.12" /> <comment value="HouseNumber" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.HouseNumber" /> </mapping> </element> <element id="Address.line.extension:houseNumber.value[x]:valueString"> <path value="Address.line.extension.value[x]" /> <sliceName value="valueString" /> <short value="Value of extension" /> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)." /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:houseNumberLetter-houseNumberAddition"> <path value="Address.line.extension" /> <sliceName value="houseNumberLetter-houseNumberAddition" /> <short value="buildingNumberSuffix" /> <definition value="Any alphabetic character, fraction or other text that may appear after the numeric portion of a building number." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-buildingNumberSuffix" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="ADXP[partType=BNS]" /> </mapping> </element> <element id="Address.line.extension:houseNumberLetter-houseNumberAddition.id"> <path value="Address.line.extension.id" /> <representation value="xmlAttr" /> <short value="xml:id (or equivalent in JSON)" /> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Address.line.extension:houseNumberLetter-houseNumberAddition.extension"> <path value="Address.line.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional Content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:houseNumberLetter-houseNumberAddition.url"> <path value="Address.line.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <fixedUri value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-buildingNumberSuffix" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:houseNumberLetter-houseNumberAddition.value[x]"> <path value="Address.line.extension.value[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <short value="HouseNumberLetter / HouseNumberAddition" /> <definition value="Export: - If a HouseNumberLetter as well as a HouseNumberAddition is known: HouseNumberLetter first, followed by a space and finally the HouseNumberAddition. - If only a HouseNumberLetter is known, send just that. No trailing space is required. - If only a HouseNumberAddition is known, communicate that with a leading space. Import - If the value of buildingNumberSuffix contains no space, then the whole value is considered to be the HouseNumberLetter. - If the value of buildingNumberSuffix contains a space, then everything before the first space is considered to be the HouseNumberLetter, and the everything trailing the first space is considered to be the HouseNumberAddition. Note: While a leading space is allowed in string values in FHIR, the parsing of such space cannot be guaranteed in XML representations. Although aware of this issue, this mapping is not changed because of compatibility reasons. If an implementer cannot parse a leading space, the practical risk of mapping a HouseNumberIndication to a HouseNumberAddition is deemed insignificant." /> <alias value="Huisnummerletter" /> <alias value="Huisnummertoevoeging" /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="base64Binary" /> </type> <type> <code value="boolean" /> </type> <type> <code value="code" /> </type> <type> <code value="date" /> </type> <type> <code value="dateTime" /> </type> <type> <code value="decimal" /> </type> <type> <code value="id" /> </type> <type> <code value="instant" /> </type> <type> <code value="integer" /> </type> <type> <code value="markdown" /> </type> <type> <code value="oid" /> </type> <type> <code value="positiveInt" /> </type> <type> <code value="string" /> </type> <type> <code value="time" /> </type> <type> <code value="unsignedInt" /> </type> <type> <code value="uri" /> </type> <type> <code value="Address" /> </type> <type> <code value="Age" /> </type> <type> <code value="Annotation" /> </type> <type> <code value="Attachment" /> </type> <type> <code value="CodeableConcept" /> </type> <type> <code value="Coding" /> </type> <type> <code value="ContactPoint" /> </type> <type> <code value="Count" /> </type> <type> <code value="Distance" /> </type> <type> <code value="Duration" /> </type> <type> <code value="HumanName" /> </type> <type> <code value="Identifier" /> </type> <type> <code value="Money" /> </type> <type> <code value="Period" /> </type> <type> <code value="Quantity" /> </type> <type> <code value="Range" /> </type> <type> <code value="Ratio" /> </type> <type> <code value="Reference" /> </type> <type> <code value="SampledData" /> </type> <type> <code value="Signature" /> </type> <type> <code value="Timing" /> </type> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.11" /> <comment value="HouseNumberLetter" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.10" /> <comment value="HouseNumberAddition" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.HouseNumberLetter" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.HouseNumberAddition" /> </mapping> </element> <element id="Address.line.extension:houseNumberLetter-houseNumberAddition.value[x]:valueString"> <path value="Address.line.extension.value[x]" /> <sliceName value="valueString" /> <short value="Value of extension" /> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)." /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:houseNumberIndication"> <path value="Address.line.extension" /> <sliceName value="houseNumberIndication" /> <short value="additionalLocator" /> <definition value="This can be a unit designator, such as apartment number, suite number, or floor. There may be several unit designators in an address (e.g., "3rd floor, Appt. 342"). This can also be a designator pointing away from the location, rather than specifying a smaller location within some larger one (e.g., Dutch "t.o." means "opposite to" for house boats located across the street facing houses)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-additionalLocator" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="ADXP[partType=ADL]" /> </mapping> </element> <element id="Address.line.extension:houseNumberIndication.id"> <path value="Address.line.extension.id" /> <representation value="xmlAttr" /> <short value="xml:id (or equivalent in JSON)" /> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Address.line.extension:houseNumberIndication.extension"> <path value="Address.line.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional Content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:houseNumberIndication.url"> <path value="Address.line.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <fixedUri value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-additionalLocator" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:houseNumberIndication.value[x]"> <path value="Address.line.extension.value[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <short value="HouseNumberIndication" /> <definition value="The indication used for addresses which do not consist of the usual street name and house number." /> <comment value="The coded HouseNumberIndication concept (CD datatype) is mapped to a FHIR string datatype with a constraint added (the value can only be 'by' or 'to')." /> <alias value="AanduidingBijNummer" /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="base64Binary" /> </type> <type> <code value="boolean" /> </type> <type> <code value="code" /> </type> <type> <code value="date" /> </type> <type> <code value="dateTime" /> </type> <type> <code value="decimal" /> </type> <type> <code value="id" /> </type> <type> <code value="instant" /> </type> <type> <code value="integer" /> </type> <type> <code value="markdown" /> </type> <type> <code value="oid" /> </type> <type> <code value="positiveInt" /> </type> <type> <code value="string" /> </type> <type> <code value="time" /> </type> <type> <code value="unsignedInt" /> </type> <type> <code value="uri" /> </type> <type> <code value="Address" /> </type> <type> <code value="Age" /> </type> <type> <code value="Annotation" /> </type> <type> <code value="Attachment" /> </type> <type> <code value="CodeableConcept" /> </type> <type> <code value="Coding" /> </type> <type> <code value="ContactPoint" /> </type> <type> <code value="Count" /> </type> <type> <code value="Distance" /> </type> <type> <code value="Duration" /> </type> <type> <code value="HumanName" /> </type> <type> <code value="Identifier" /> </type> <type> <code value="Money" /> </type> <type> <code value="Period" /> </type> <type> <code value="Quantity" /> </type> <type> <code value="Range" /> </type> <type> <code value="Ratio" /> </type> <type> <code value="Reference" /> </type> <type> <code value="SampledData" /> </type> <type> <code value="Signature" /> </type> <type> <code value="Timing" /> </type> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="houseNumberIndication" /> <severity value="error" /> <human value="Must have value 'by' or 'to'" /> <expression value="value in ('by' | 'to')" /> <source value="https://fhir.healthdata.be/StructureDefinition/HdBe-AddressInformation" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.9" /> <comment value="HouseNumberIndication" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.HouseNumberIndication" /> </mapping> </element> <element id="Address.line.extension:houseNumberIndication.value[x]:valueString"> <path value="Address.line.extension.value[x]" /> <sliceName value="valueString" /> <short value="Value of extension" /> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)." /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:additionalInformation"> <path value="Address.line.extension" /> <sliceName value="additionalInformation" /> <short value="unitID" /> <definition value="The number or name of a specific unit contained within a building or complex, as assigned by that building or complex." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-unitID" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="ADXP[partType=UNID]" /> </mapping> </element> <element id="Address.line.extension:additionalInformation.id"> <path value="Address.line.extension.id" /> <representation value="xmlAttr" /> <short value="xml:id (or equivalent in JSON)" /> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Address.line.extension:additionalInformation.extension"> <path value="Address.line.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional Content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:additionalInformation.url"> <path value="Address.line.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <fixedUri value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-unitID" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.extension:additionalInformation.value[x]"> <path value="Address.line.extension.value[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <short value="AdditionalInformation" /> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)." /> <alias value="AdditioneleInformatie" /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="base64Binary" /> </type> <type> <code value="boolean" /> </type> <type> <code value="code" /> </type> <type> <code value="date" /> </type> <type> <code value="dateTime" /> </type> <type> <code value="decimal" /> </type> <type> <code value="id" /> </type> <type> <code value="instant" /> </type> <type> <code value="integer" /> </type> <type> <code value="markdown" /> </type> <type> <code value="oid" /> </type> <type> <code value="positiveInt" /> </type> <type> <code value="string" /> </type> <type> <code value="time" /> </type> <type> <code value="unsignedInt" /> </type> <type> <code value="uri" /> </type> <type> <code value="Address" /> </type> <type> <code value="Age" /> </type> <type> <code value="Annotation" /> </type> <type> <code value="Attachment" /> </type> <type> <code value="CodeableConcept" /> </type> <type> <code value="Coding" /> </type> <type> <code value="ContactPoint" /> </type> <type> <code value="Count" /> </type> <type> <code value="Distance" /> </type> <type> <code value="Duration" /> </type> <type> <code value="HumanName" /> </type> <type> <code value="Identifier" /> </type> <type> <code value="Money" /> </type> <type> <code value="Period" /> </type> <type> <code value="Quantity" /> </type> <type> <code value="Range" /> </type> <type> <code value="Ratio" /> </type> <type> <code value="Reference" /> </type> <type> <code value="SampledData" /> </type> <type> <code value="Signature" /> </type> <type> <code value="Timing" /> </type> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.7" /> <comment value="AdditionalInformation" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.AdditionalInformation" /> </mapping> </element> <element id="Address.line.extension:additionalInformation.value[x]:valueString"> <path value="Address.line.extension.value[x]" /> <sliceName value="valueString" /> <short value="Value of extension" /> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)." /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.line.value"> <path value="Address.line.value" /> <representation value="xmlAttr" /> <short value="Primitive value for string" /> <definition value="Primitive value for string" /> <min value="0" /> <max value="1" /> <base> <path value="string.value" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <maxLength value="1048576" /> </element> <element id="Address.city"> <path value="Address.city" /> <short value="PlaceOfResidence" /> <definition value="A geographically determined area which forms part of the municipal area." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <alias value="Municpality" /> <alias value="Woonplaats" /> <min value="0" /> <max value="1" /> <base> <path value="Address.city" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="Erewhon" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XAD.3" /> </mapping> <mapping> <identity value="rim" /> <map value="AD.part[parttype = CTY]" /> </mapping> <mapping> <identity value="vcard" /> <map value="locality" /> </mapping> <mapping> <identity value="servd" /> <map value="./Jurisdiction" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.3" /> <comment value="PlaceOfResidence" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.PlaceOfResidence" /> </mapping> </element> <element id="Address.district"> <path value="Address.district" /> <short value="Municipality" /> <definition value="Municipality of residence." /> <comment value="District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead." /> <alias value="County" /> <alias value="Gemeente" /> <min value="0" /> <max value="1" /> <base> <path value="Address.district" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="Madison" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XAD.9" /> </mapping> <mapping> <identity value="rim" /> <map value="AD.part[parttype = CNT | CPA]" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.4" /> <comment value="Municipality" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.Municipality" /> </mapping> </element> <element id="Address.state"> <path value="Address.state" /> <short value="Sub-unit of country (abbreviations ok)" /> <definition value="Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (i.e. US 2 letter state codes)." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <alias value="Province" /> <alias value="Territory" /> <min value="0" /> <max value="1" /> <base> <path value="Address.state" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XAD.4" /> </mapping> <mapping> <identity value="rim" /> <map value="AD.part[parttype = STA]" /> </mapping> <mapping> <identity value="vcard" /> <map value="region" /> </mapping> <mapping> <identity value="servd" /> <map value="./Region" /> </mapping> </element> <element id="Address.postalCode"> <path value="Address.postalCode" /> <short value="Postcode" /> <definition value="Postcode of the address." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <alias value="Zip" /> <alias value="Postcode" /> <min value="0" /> <max value="1" /> <base> <path value="Address.postalCode" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="9132" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XAD.5" /> </mapping> <mapping> <identity value="rim" /> <map value="AD.part[parttype = ZIP]" /> </mapping> <mapping> <identity value="vcard" /> <map value="code" /> </mapping> <mapping> <identity value="servd" /> <map value="./PostalIdentificationCode" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.6" /> <comment value="Postcode" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.Postcode" /> </mapping> </element> <element id="Address.country"> <path value="Address.country" /> <short value="Country (e.g. can be ISO 3166 2 or 3 letter code)" /> <definition value="Country - a nation as commonly understood or generally accepted." /> <comment value="The FHIR datatype does not properly support coding the country using a CodeableConcept or Coding datatype. If the sender supports coded countries, it SHALL send the coded value using the CodeSpecification extension under `Address.country.extension:countryCode`." /> <min value="0" /> <max value="1" /> <base> <path value="Address.country" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="XAD.6" /> </mapping> <mapping> <identity value="rim" /> <map value="AD.part[parttype = CNT]" /> </mapping> <mapping> <identity value="vcard" /> <map value="country" /> </mapping> <mapping> <identity value="servd" /> <map value="./Country" /> </mapping> </element> <element id="Address.country.id"> <path value="Address.country.id" /> <representation value="xmlAttr" /> <short value="xml:id (or equivalent in JSON)" /> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Address.country.extension"> <path value="Address.country.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional Content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.country.extension:countryCode"> <path value="Address.country.extension" /> <sliceName value="countryCode" /> <short value="Optional Extensions Element" /> <definition value="Optional Extension Element - found in all resources." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="https://fhir.healthdata.be/StructureDefinition/ext-CodeSpecification" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.country.extension:countryCode.id"> <path value="Address.country.extension.id" /> <representation value="xmlAttr" /> <short value="xml:id (or equivalent in JSON)" /> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <comment value="Note that FHIR strings may not exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Address.country.extension:countryCode.extension"> <path value="Address.country.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional Content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.country.extension:countryCode.url"> <path value="Address.country.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <fixedUri value="https://fhir.healthdata.be/StructureDefinition/ext-CodeSpecification" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Address.country.extension:countryCode.value[x]"> <path value="Address.country.extension.value[x]" /> <short value="Country" /> <definition value="Country in which the address is located." /> <alias value="Land" /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <strength value="required" /> <description value="Iso 3166 Part 1: 2 Letter Codes" /> <valueSet value="https://fhir.healthdata.be/ValueSet/CountryISO" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.5" /> <comment value="Country" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.Country" /> </mapping> </element> <element id="Address.country.value"> <path value="Address.country.value" /> <representation value="xmlAttr" /> <short value="Primitive value for string" /> <definition value="Primitive value for string" /> <min value="0" /> <max value="1" /> <base> <path value="string.value" /> <min value="0" /> <max value="1" /> </base> <type> <code> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-json-type"> <valueString value="string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-xml-type"> <valueString value="xsd:string" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-rdf-type"> <valueString value="xsd:string" /> </extension> </code> </type> <maxLength value="1048576" /> </element> <element id="Address.period"> <path value="Address.period" /> <short value="Time period when address was/is in use" /> <definition value="Time period when address was/is in use." /> <comment value="This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration." /> <requirements value="Allows addresses to be placed in historical context." /> <min value="0" /> <max value="1" /> <base> <path value="Address.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <example> <label value="General" /> <valuePeriod> <start value="2010-03-23" /> <end value="2010-07-01" /> </valuePeriod> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() | (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.empty() or end.empty() or (start <= end)" /> <xpath value="not(exists(f:start)) or not(exists(f:end)) or (f:start/@value <= f:end/@value)" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="XAD.12 / XAD.13 + XAD.14" /> </mapping> <mapping> <identity value="rim" /> <map value="./usablePeriod[type="IVL<TS>"]" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> </snapshot> <differential> <element id="Address"> <path value="Address" /> <short value="AddressInformation" /> <definition value="This datatype defines a common basis for expressing all addresses around the world, but adds extensions to express Belgium addresses specifically, according to the CBB AddressInformation. A Belgian Address still is a proper FHIR Address, which means that systems that cannot interpret the extensions will still be able to render and work with this datatype. To have true compatibility an implementer SHOULD use the core Address parts as intended. To have addresses work for Belgium context, the implementer SHOULD in addition use the extension element. **Separate address parts** The first addition is that Belgium addresses make certain address parts separately communicable. These parts are required for use in true Belgian systems when dealing with Belgian addresses, but may not have value for international systems when information gets sent abroad." /> <alias value="Adresgegevens" /> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.1" /> <comment value="AddressInformation" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation" /> </mapping> </element> <element id="Address.extension"> <path value="Address.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <rules value="open" /> </slicing> <min value="1" /> </element> <element id="Address.extension:language"> <path value="Address.extension" /> <sliceName value="language" /> <min value="1" /> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/StructureDefinition/language" /> </type> <isModifier value="false" /> </element> <element id="Address.use"> <path value="Address.use" /> <short value="AddressType" /> <definition value="The type of address in question, such as a home address or mailing address." /> <alias value="AdresSoort" /> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.8" /> <comment value="AddressType" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.AddressUse" /> </mapping> </element> <element id="Address.type"> <path value="Address.type" /> <short value="AddressType" /> <definition value="The type of address in question, such as a home address or mailing address." /> <alias value="AdresSoort" /> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.8" /> <comment value="AddressType" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.AddressType" /> </mapping> </element> <element id="Address.line"> <path value="Address.line" /> <comment value="The elements of Address stored in the address-part extensions will be ignored by applications that do not support them, so any information in them should also be duplicated in the `Address.line` to which they are attached. The value of `Address.line` should be populated with a complete string representation of all the separate extension values, like: "[Street] [HouseNumberIndication] [HouseNumber] [HouseNumberLetter] [HouseNumberAddition]"." /> </element> <element id="Address.line.extension"> <path value="Address.line.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <rules value="open" /> </slicing> <min value="0" /> </element> <element id="Address.line.extension:streetName"> <path value="Address.line.extension" /> <sliceName value="streetName" /> <min value="0" /> <max value="1" /> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetName" /> </type> </element> <element id="Address.line.extension:streetName.value[x]"> <path value="Address.line.extension.value[x]" /> <short value="Street" /> <definition value="Street name of the address." /> <alias value="Straat" /> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.2" /> <comment value="Street" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.Street" /> </mapping> </element> <element id="Address.line.extension:houseNumber"> <path value="Address.line.extension" /> <sliceName value="houseNumber" /> <min value="0" /> <max value="1" /> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-houseNumber" /> </type> </element> <element id="Address.line.extension:houseNumber.value[x]"> <path value="Address.line.extension.value[x]" /> <short value="HouseNumber" /> <definition value="House number of the address." /> <alias value="Huisnummer" /> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.12" /> <comment value="HouseNumber" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.HouseNumber" /> </mapping> </element> <element id="Address.line.extension:houseNumberLetter-houseNumberAddition"> <path value="Address.line.extension" /> <sliceName value="houseNumberLetter-houseNumberAddition" /> <min value="0" /> <max value="1" /> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-buildingNumberSuffix" /> </type> </element> <element id="Address.line.extension:houseNumberLetter-houseNumberAddition.value[x]"> <path value="Address.line.extension.value[x]" /> <short value="HouseNumberLetter / HouseNumberAddition" /> <definition value="Export: - If a HouseNumberLetter as well as a HouseNumberAddition is known: HouseNumberLetter first, followed by a space and finally the HouseNumberAddition. - If only a HouseNumberLetter is known, send just that. No trailing space is required. - If only a HouseNumberAddition is known, communicate that with a leading space. Import - If the value of buildingNumberSuffix contains no space, then the whole value is considered to be the HouseNumberLetter. - If the value of buildingNumberSuffix contains a space, then everything before the first space is considered to be the HouseNumberLetter, and the everything trailing the first space is considered to be the HouseNumberAddition. Note: While a leading space is allowed in string values in FHIR, the parsing of such space cannot be guaranteed in XML representations. Although aware of this issue, this mapping is not changed because of compatibility reasons. If an implementer cannot parse a leading space, the practical risk of mapping a HouseNumberIndication to a HouseNumberAddition is deemed insignificant." /> <alias value="Huisnummerletter" /> <alias value="Huisnummertoevoeging" /> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.11" /> <comment value="HouseNumberLetter" /> </mapping> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.10" /> <comment value="HouseNumberAddition" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.HouseNumberLetter" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.HouseNumberAddition" /> </mapping> </element> <element id="Address.line.extension:houseNumberIndication"> <path value="Address.line.extension" /> <sliceName value="houseNumberIndication" /> <min value="0" /> <max value="1" /> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-additionalLocator" /> </type> </element> <element id="Address.line.extension:houseNumberIndication.value[x]"> <path value="Address.line.extension.value[x]" /> <short value="HouseNumberIndication" /> <definition value="The indication used for addresses which do not consist of the usual street name and house number." /> <comment value="The coded HouseNumberIndication concept (CD datatype) is mapped to a FHIR string datatype with a constraint added (the value can only be 'by' or 'to')." /> <alias value="AanduidingBijNummer" /> <constraint> <key value="houseNumberIndication" /> <severity value="error" /> <human value="Must have value 'by' or 'to'" /> <expression value="value in ('by' | 'to')" /> </constraint> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.9" /> <comment value="HouseNumberIndication" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.HouseNumberIndication" /> </mapping> </element> <element id="Address.line.extension:additionalInformation"> <path value="Address.line.extension" /> <sliceName value="additionalInformation" /> <min value="0" /> <max value="1" /> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-unitID" /> </type> </element> <element id="Address.line.extension:additionalInformation.value[x]"> <path value="Address.line.extension.value[x]" /> <short value="AdditionalInformation" /> <alias value="AdditioneleInformatie" /> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.7" /> <comment value="AdditionalInformation" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.AdditionalInformation" /> </mapping> </element> <element id="Address.city"> <path value="Address.city" /> <short value="PlaceOfResidence" /> <definition value="A geographically determined area which forms part of the municipal area." /> <alias value="Woonplaats" /> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.3" /> <comment value="PlaceOfResidence" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.PlaceOfResidence" /> </mapping> </element> <element id="Address.district"> <path value="Address.district" /> <short value="Municipality" /> <definition value="Municipality of residence." /> <alias value="Gemeente" /> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.4" /> <comment value="Municipality" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.Municipality" /> </mapping> </element> <element id="Address.postalCode"> <path value="Address.postalCode" /> <short value="Postcode" /> <definition value="Postcode of the address." /> <alias value="Postcode" /> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.6" /> <comment value="Postcode" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.Postcode" /> </mapping> </element> <element id="Address.country"> <path value="Address.country" /> <comment value="The FHIR datatype does not properly support coding the country using a CodeableConcept or Coding datatype. If the sender supports coded countries, it SHALL send the coded value using the CodeSpecification extension under `Address.country.extension:countryCode`." /> </element> <element id="Address.country.extension"> <path value="Address.country.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <rules value="open" /> </slicing> <min value="0" /> </element> <element id="Address.country.extension:countryCode"> <path value="Address.country.extension" /> <sliceName value="countryCode" /> <min value="0" /> <max value="1" /> <type> <code value="Extension" /> <profile value="https://fhir.healthdata.be/StructureDefinition/ext-CodeSpecification" /> </type> </element> <element id="Address.country.extension:countryCode.value[x]"> <path value="Address.country.extension.value[x]" /> <short value="Country" /> <definition value="Country in which the address is located." /> <alias value="Land" /> <binding> <strength value="required" /> <description value="Iso 3166 Part 1: 2 Letter Codes" /> <valueSet value="https://fhir.healthdata.be/ValueSet/CountryISO" /> </binding> <mapping> <identity value="zib-addressinformation-v1.1-2020EN" /> <map value="NL-CM:20.5.5" /> <comment value="Country" /> </mapping> <mapping> <identity value="HdBe-AddressInformation" /> <map value="AddressInformation.Country" /> </mapping> </element> </differential> </StructureDefinition>